While connecting the flood light plug on to the 415 V distribution panel,there was spark and the cable got burnt. Three ignitors of the flood light also burnt of. The lamps are of 400 W (total 6 lamps) connected through 1.5 mm2 cable. The plug was immediately removed from the circuit. There was a 30 mA RCD connected and a 250 A MCCB; however both did not trip. What could be the possible reasons for the circuit devices not to trip?Can someone assist please. Additional info if needed can be provided.

2 Answers  

---

Will The Rated Capacity of 20 MVA ,220/6.6 KV, ONAN cooling Power Tranformer be increased up to 25 MVA with respect to its %Impedence by ONAF cooling with same rating..?

2 Answers   Ambuja,

---

how to identify the failer of igbt

0 Answers  

---

why a diode bridge is provided in vcb control circuit ?

2 Answers  

---

What does impedance in the windings of transformer signify.

2 Answers   Johnson Controls,

---

What is the arc. I saw word arc in between sf6 & vcb brakers

1 Answers   Cap Gemini,

---

what is the different between rms and average value

1 Answers   Finolex, TATA,

---

what is the difference between pvc & fiber glass cables

0 Answers  

---

I have a CT meter with ratio 60/5. The meter reading of previous month was 3290.49 and that of current month was 3797.26. How many chargeable units as per normal meter should be my reading.

0 Answers  

---

What are series and parallel isolators?

3 Answers  

---

Direction of flow of active power and reactive power with logic?

0 Answers  

---

What is the difference between an insulator and a dielectric?

2 Answers  

---