Answer / jagan

1 hp = 735
p=735*5/root 3* 415 =5.11A

I decided to provide a 11KV / 440V Xformer in my Substaion. What are the protection required for that?

5 Answers  

---

what is the main function of contactor?????

9 Answers  

---

Dear Friends, I have a 500KVA transformer supplying whole factory having 3 phase and single phase mixed loads. Power room has ammeters connected via CTs for individual phase. Now I know that readings shown on meter for each phase say R,Y and B are line currents. But when I want to know the total on transformer do I need to add the currents of all three phases readings shown on meter or value for anyone phase will give me the correct power load on transformer for that point of time. 2. If ammeter shows unbalanced readings for R,Y, B phases say 150, 250 and 300 respectively so can I assume that 150A i.e average of 3 will be the 3phase load currents and remaining will be 1phase currents. Please clarify my doubt.

4 Answers  

---

WHY NUTRAL GROUND SYSTEM USED IN 33KV SYSTEM

0 Answers   RasGas,

---

When one of three series resistors is removed from a circuit and the circuit is reconnected, the current

1 Answers  

---

what s d difference between inverter an ups

1 Answers   Jindal,

---

At 765Kv, I have seen the use of PT at line side for metering and CVT for protection, although as far as my knowledge is concern, PT at this voltage level will have huge loss and more cost as compared to CVT as CVT can also perform same function of Protection and Metering? So my question is why use PT and not CVT for metering and protection in order to reduce the cost.

1 Answers  

---

i am getting to neutral earth voltage zero ,is this a perfect earthing ?

3 Answers  

---

What Is Connection APFC Panel In Compony.

0 Answers  

---

Which thing is maximum in RLC circuit at resonance a)power consumption b)inductive current c)capacitive voltage

0 Answers  

---

why the admittance matrix or y bus matrix of a large network is called sparse matrix?

3 Answers  

---

why we multiply 11 in High Electric supply?(eg.11KV, 33Kv, 330Kv etc.)

3 Answers  

---