Answer / jarziz

sea water is one of d earth

I just purchased a 4 position cam switch to be used to operate a 3-speed blower motor. The motor is a 10 amp motor and has 3 wires that are used to control speed. The cam switch was rated at 660V 20 amps but when I received it, I noticed that it has AC-15 operational current rating (Ie) of 4/5 amps. If I am reading the label correctly. the 4/5 amps is related to 440v/220V (Ue). Other ratings are AC-3: 5.5A, AC2: 7.5A and AC-4: 1.5A. My questions are 1) Is it safe to use this switch with the motor I have 2) what is the difference between the 20 amp Ith ratting and the Ie operational ratings?

0 Answers  

---

An 8 pole, 50 Hz, 3-phase IM is loaded to a poing where pull out torque will occur. The rotor resistance per phase is 0.3 ohm and motor stalls at 650 rpm. The rotor frequency at maximum torque point is A 3.33% B 4.44% C 5.55% D 6.66%

1 Answers  

---

In which connection the distribution T/F is connected? a) ▲ / Y b) Y / ▲ c) ▲ / ▲ d) Y / Y

4 Answers  

---

Why a motor blower cobination draw more current at winter than summer?

1 Answers  

---

I have 2 KW electric water heater.I am gonna use it in controlling water temp.so I needed to increase or decrease the heating capacity.is there any electrical-electronic circuit for varying the resistance & so current?

1 Answers  

---

25 kvar capacitor , how much current ? For 25 KVAR--Capacitor I = ?

3 Answers  

---

if 11 lead acid batteries each 200 amph are connected in series so that combinly they can produce 110 volts dc. question is how much backup it can provide ? 2) how can we calculate that how much amprere and voltage is required to charge them . thanks in advance !

1 Answers  

---

what is the voltage of insulation megger that should be used for measuring the resitance of 66kv equipments.

3 Answers   DEWA,

---

HI SIR, AM PREPARING FOR RRB FOR SECTION ENGINEER POST. PLZ SEND ME THE PREVIOUS QUESTION PAPERS AND HELP ME. I HAVE NO ENOUGH TIME MY EXAM DATE IS 22ND JUNE.... MY EMAIL ID IS nalla.amarnath@gmail.com

0 Answers  

---

what is mean by live tank and dead tank in current transformers?

1 Answers  

---

how to check capacitor in general

1 Answers  

---

The following equipment are installed ia a plant 1. 110KW Induction motor 4 Nos 2. 30 HP motor 3 Nos 3 15 HP Motor 3 Nos 4 7.5 HP motor 4 Nos what is total load of plant if one of each is stand by.

3 Answers   Blue Star,

---