1. what is exciting winding, rotor winding, startor
winding. and how it works? in ac generator
Answers were Sorted based on User's Feedback
Answer / pradyumna chandra panda
Field winding of ac generator is act as exciting winding and it wound in rotor to collect more power from stator (armature)or in stetor where rotor act armature. Intially there is some residual magnet in field winding and gradualy increase with increasing rpm by collect emf from armature stepdowned by 24 volt dc or more. some time it is seperatly excited by a battary or by a dc generator.
| Is This Answer Correct ? | 6 Yes | 0 No |
exiciting winding/rotor winding is same to produce the uni
form flux, stator winding is to collcect current
| Is This Answer Correct ? | 3 Yes | 0 No |
Answer / bakarixx4
i dont know the answer so please give me answer
| Is This Answer Correct ? | 0 Yes | 2 No |
what is the minimum recommended leakage current of an earthed cable connected to the body or skid of an alternator
What is the difference between acs 550 & acs 850
What is the rotor frequency of 10 Hp 1440 RPM 50HZ 415V ?
Formulae for calculating the transmission line losses for different voltage levels
What should be the overcurrent, instantaneous overcurrent, short cicuit current settings (i.e. how many times of motor full load and what is the time duration) for a motor?
how to calculate sizing of NGTR (Transformer rating,Loading resistor value and Current rating of resistor) and what is the X/R ratio. Details : 11kV,Capacitance 1.73532 micro farads,40kA for 1sec.
1 Answers Bhel, Indorama, Power Grid,
750kva 11/415kv transformer having percentage impedence is5.64%. 11KV HV whose current 39.37A and 415V LV whose current 1043.43A.resistance is 2.5ohm. find no load loss and full load loss?
What is the capacity of the Fastners 12mm?
can we choose current transformer secondary, to calculate residual flux in a power transformer, so as its saturation is close to the saturation level of power transformer?
What should be the DC voltage for Hi-pot test on 11kv switchgear
Distinguish between neutral earthing and equipment earthing?
why induction motor's p.f 0.8
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)