how much kgs should Cement,sand & aggregate to be added for 1cumt,mix is M15,M20,M25,M30

Answers were Sorted based on User's Feedback

how much kgs should Cement,sand & aggregate to be added for 1cumt,mix is M15,M20,M25,M30..

it is very simple
let M15 concrete the nominal mix is 1:2:4
1.53/1+2+4 = 0.219 it the quantity for cement in cu.m.
.219*28.8 = 6.31 begs
6.31*50 = 315.5 kg
and sand .219*2 = .438 cu.m.
aggregate .219*4 = .876 cu.m.

all nominal mix are the same.

 Is This Answer Correct ? 19 Yes 3 No

how much kgs should Cement,sand & aggregate to be added for 1cumt,mix is M15,M20,M25,M30..

As per nominal mix M15 is 1:2:4
cement =(1440x.46)/2=331.00 kgs
sand = 2x331 =662.00 kgs
Aggregate = 4x331 =1324.00 kgs

same as M20 also mix is 1:1.5:3

M30 is as per design mix we calculate

 Is This Answer Correct ? 19 Yes 9 No

how much kgs should Cement,sand & aggregate to be added for 1cumt,mix is M15,M20,M25,M30..

In 1 answer why we have to take 1.53.plz tell me

 Is This Answer Correct ? 0 Yes 0 No

how much kgs should Cement,sand & aggregate to be added for 1cumt,mix is M15,M20,M25,M30..

1.53 use because dry volume of cement is 52% so thats why we hav to add .52

 Is This Answer Correct ? 0 Yes 0 No

More Civil Engineering Interview Questions

How to calculate cement qty of M10, m20, m25 ? I got the formula but I lost it.

Why provides hook of stirrups only ones side?

how to replace 8mm bar with 10mm bar if the the 8mm bar is not available..???

The building has 12 columns of 12x9 in 3 rows of 4 each in a plot of 50'x30', The central row is strengthened with 16mm twisted rods. The roof area is 1500 sft including balconies. calculate the load factor per sft. Also indicate the number of roofs the building can withstand.

how to workable concrete cube test M-25 design mix

how bitumen is prepared for NH,SH &other roads

A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals

What are the tests to be conducted on cement?

How much overlaping required for welding the reinforcement bars in Columns & beams

C40/50 of concrete strength is saying that 40Mpa(by using cylinder specimen) and 50Map (by using cubic specimen), but this concrete strength is Characteristic concrete strength or target mean concrete strength?

what are the duties of Site Engineer in work site?

how to calculate Tile skirting

Categories
• Civil Engineering (4639)
• Mechanical Engineering (3703)
• Electrical Engineering (15779)
• Electronics Communications (2638)
• Chemical Engineering (762)
• Aeronautical Engineering (79)
• Bio Engineering (30)
• Metallurgy (95)
• Industrial Engineering (199)
• Instrumentation (2882)
• Automobile Engineering (171)
• Mechatronics Engineering (41)
• Marine Engineering (62)
• Power Plant Engineering (170)
• Engineering AllOther (1334)