a solar energy installation utilizes a three phase bridge
converter to feed energy into power system through a
transformer of 400v/400v.the energy is collected in a bank
of 400v battery and is connected to converter through a
large filter choke of resistance 10ohms.1.the maximum
current through the battrey will be.2.the kva rating of the
input transformer is.
as we have given battery voltage 400v which is dc voltage.
choke resistance is 10ohm which is in series with battery so,
max current through the battery will be=400/10
=10amp
10amp is a dc current max current is = sqrt2*10
kva rating is = kv*i
400*sqrt2*10
=22.6kva
| Is This Answer Correct ? | 3 Yes | 11 No |
why we testing the core balance of the transformer before comissioning?
in 400 kv system why should trip both side CB when we give hand trip?
what would u consider to be the basic purchase order information you would need to proceed with a cable inspection assignment?
Why Two Transformers aside shoud be supperated by concreted wall?
I try to check the three phase voltage in multimeter, in 125A isolator switch incommer. first i touch R phase, and then i touch Y phase using multimeter, the moment i touched, it blasts and that moment i got blindness. multimeter selector position is correct(750V AC MODE AND RED PROBE WASS IN v AND BLACK PROBE WASS IN COM. MODE. COULD ANYBODY GIVE ANSWER FOR THIS TO AVOID FURTHER ACCIDENTS PLEASE?
What happens to a motor if it is connected in Delta connection
The CHARGED BATTERY GET DISCHARGED WHEN IT IS NOT IN USE FOR LONG TIME.GIVE REASON.
I got shortlisted in RRB thiruvananthapuram for the post of Junior Electrical engineer, waiting List - 7. i want to know about the validity of the current list and chance to get the job please help anybody knws abt it,, thank you
What is the difference between XLPE & FRLS cables? Is FRLS cables is a type of XLPE cable or both r different?
what is the reason of capacitor failure in alternator which is working with 10 kva dgset
if a 3 phase induction stator has charactristic plate and have on winding inside.with the calculation of plate or dimenssion of core how one can desinge rewinding drawing.
Why R ph of Hv and Lv is shorted or joined together while taking vector group?
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)