Answer / pushpalatha. t

polyamide, spiralwounded and cellulose acetate are the membranes used in the RO water treatment plant. mostly poly amide membranes are used because there is minimum amount of rejection occurs.

Answer / harinathareddy

Thinflimcomposite,polyamide&celluloseacetate

Question 53 - In the purchase of a machine with a period n = 8.5 years, the minimum attractive rate of return, i = 12 %, the cost P = $55000, F = $4000 is the salvage, annual maintenance A = $3500. The return of the investment or equivalent uniform annual benefit is $15000. The equivalent uniform annual cost is P (A / P, i, n) + A - F (A / F, i, n). The investment is considered acceptable only when equivalent uniform annual benefit is greater than the equivalent uniform annual cost. From the compound interest table, (A / P, i = 12 %, n = 8 years) = 0.2013, (A / P, i = 12 %, n = 9 years) = 0.1877, (A / F, i = 12 %, n = 8 years) = 0.0813, (A / F, i = 12 %, n = 9 years) = 0.0677. Prove by calculations whether the investment above is acceptable.

1 Answers  

---

Explain why is a vacuum breaker used on shell and tube heat exchangers that are utilizing steam as the heating utility?

0 Answers  

---

what is mean by chemical engineering and its scope in industry

0 Answers  

---

Hi, few days back i attended an interview. Currently my employment status is contract basis and interviewer didn't ask me abt mode of employment and he is thinking that am permanent employee in this organization and during the time of joining how I would avoid this problem.

1 Answers  

---

COMPUTER PROGRAMMING FOR ENGINEERS - EXAMPLE 17.2 : There are 5 simultaneous equations with 5 unknowns as follow : 16 V - 4 X - Z = 36, 4 X - 4 W - Y + Z = 3, 8 V + 4 W - X + Y = 10, X - W = 1, V + W = 0. Find the values of V, W, X, Y and Z accurately within 15 minutes. State the computer program that you use to get the answers.

1 Answers  

---

Why should a magnesium ribbon be cleaned before burning in air?

0 Answers  

---

any meter avilable for measureing the Transformer Losses. ( like Voltmeter for voltage & ammiter for currenr )if yes plz give the make & supplier address, Email, Phone number.

0 Answers   Piramal Healthcare,

---

How i can calculate heat transfer in reactor at unsteady state and what data should i have? I want equation and process to calculate it? As there is steam or brine in jacket

0 Answers  

---

ENGINEERING PHYSICS - EXAMPLE 30.2 : The Planck-Einstein relation connects the particulate photon energy E with its associated wave frequency f to produce E = hf. Let h to be the Planck constant. The frequency f, wavelength L and speed of light c are related by E = hc / L. With p denoting the linear momentum of a particle, the de Broglie wavelength L of the particle is given by L = h / p. (a) Find the equation of E as a function of p and c. (b) If E has a unit of electron-volt and f has a unit of 1 / second, then what is the unit of h?

1 Answers  

---

What is the angle of repose and what are its applications in the chemical industry?

0 Answers  

---

Question 73 - (a) A dryer reduces the moisture content of 100 kg of a potato product from 80 % to 10 % moisture. Find the mass of the water removed in such drying process. (b) During the drying process, the air is cooled from 80°C to 71°C in passing through the dryer. If the latent heat of vaporization corresponding to a saturation temperature of 71°C is 2331 kJ / kg for water, find the heat energy required to evaporate the water only. (c) Assume potato enters at 24°C, which is also the ambient air temperature, and leaves at the same temperature as the exit air. The specific heat of potato is 3.43 kJ / (kg °C). Find the minimum heat energy required to raise the temperature of the potatoes. (d) 250 kg of steam at 70 kPa gauge is used to heat 49,800 cubic metre of air to 80°C, and the air is cooled to 71°C in passing through the dryer. If the latent heat of steam at 70 kPa gauge is 2283 kJ / kg, find the heat energy in steam. (e) Calculate the efficiency of the dryer based heat input and output, in drying air. Use the formula (Ti - To)/(Ti - Ta) where Ti is the inlet (high) air temperature into the dryer, To is the outlet air temperature from the dryer, and Ta is the ambient air temperature.

1 Answers  

---

Name the some common problems associated with bellow expansion joints?

0 Answers  

---