Answer / k.prakashchandra

Ah*voltage /1000=stored energy in Kwh = back up time in
hours * load in KW. Here instead of load, rating of
inverter is given in Kva. So with load at 65% 0f inverter
rating or at 65% of stored energy, the above formula nearly
holds good

Answer / vivek

As per industrial thumb rule we need 12V/130AH battery to
have 1 hour backup for 1 KVA UPS. Therefore 130 is
iindicates AH which always constant for 1 KVA.

How can transformer winding insulation be measured (Delta & Star Connections)?

3 Answers  

---

What is ment by KVAR and what are the advantage&dis- advantages of KVAR

2 Answers  

---

How to identify the whether its an isolator or Breaker in MDB

5 Answers  

---

what will hapen if secodery circuit is open of current transformer WHy neutral to ground trips when neutral touches the ground

1 Answers  

---

Advantages/Disadvantages of earthing of neutral bus on MSB instead of separate neutral earthing for transformer/DG sets feeding to MSB

0 Answers  

---

IF 8255 CONTROL WORD IS 94H,Tell the chip port work mode ?

0 Answers  

---

I have draw the 350A DC current, so what is the size of cable i can use? Give me the answer with formula

1 Answers  

---

WHAT IS TANK CKT.?

4 Answers  

---

what is voltage,current,restance,. what is single phase&three phase motar. what is basic electrical 'farmoulas. what is defirens quetions of electrical maintenance.

2 Answers  

---

what is oti and wti

3 Answers   Jindal,

---

At 765Kv, I have seen the use of PT at line side for metering and CVT for protection, although as far as my knowledge is concern, PT at this voltage level will have huge loss and more cost as compared to CVT as CVT can also perform same function of Protection and Metering? So my question is why use PT and not CVT for metering and protection in order to reduce the cost.

1 Answers  

---

how to calculate earth resistat in earthpit with earth testing kit?

2 Answers  

---