Transformer/insulating oil tester(BDV tester)
Answer / randy
Email:oiltester@yahoo.cn
Manual of Transformer Oil Tester
1. Introduction:
IIJ-II Transformer Oil Tester is produced by our company,
which adopts industrial single plate integrated circuit,
new-style I/O jack, with unique inspection and anti-jamming
technology to greatly improve its reliability and
functionality.
Main features:
1. Easy operation, high autoimmunization (only press
button once and all work done automatically)
2. Menu management, data input simple and convenient
3. It can store 99 data of oil sampling tests, the
test data can be reviewed and printed in 100 years even
after power is off.
4. The clock in going on after power off.
5. The software can be upgrade through RS232 terminal.
6. Strong anti-jamming, high precision testing.
7. Small measurement, light weight, and convenient for
outdoor operation.
2. Technical parameter
1. Power supply: AC220V ±10%, 50Hz
2. Output voltage: 80kV, 100kV
3. Capacity: 1.6kVA, 2.0kVA
4. Speed of voltage increase: about 2kV/S
5. Voltage inspection accuracy: 1%
6. Breakdown sensitivity: <0.1kV
7. Waveform distortion: ≤3%
8. Breakdown response time: ≤ms
9. Working environment: temperature: 0C~40C,
humidity: max relative humidity 85%
10. Storage environment: temperature: -20C ~ 60C,
humidity: max relative humidity 75%
| Is This Answer Correct ? | 1 Yes | 0 No |
5MVA TRANSFORMER SUDDENLY FAIL WITH THE PRV TRIPPING AND LARGE AMOUNT OF OIL SPREAD OUT? SO IT CAME BACK WITH THE REPAIRING WITH REASON THAT IT FAILS BCOZ OF TRANSIENT EFFECT? SO PLZ EXPLAIN HOW DOES IT HAPPENED?
Is there any option to replace two Genset of capacity 125KVA with one higher capacity for same office?
What is frantic effect?
how can findout cable fault Location only useing MEGGER
What will be the change in its efficiency and other parameters of a ONAN transformer if it changed to ONAF transformer ?
IN electrical field, WHAT ALL THINGS THE CUSTOMER WILL ASK WHILE ORDERING FOR LT PANEL (ALL TYPES OF LOW TENSION PANEL)
what would happen if u assume to insulate all the overhead lines and no insulators....??do you think it to b an advantag or a disadvantage??justify.
How to run a three phase motor into single phase........
why we need the starters for motors
The windings of a transformer are divided into several coils, because?
What is the ampereage of .75 ton Ac
I want to know what is the short circuit level when 8 NOS 2000 kVA, 415v, 50hZ generator connected in paraller
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)