what is the difference between delta-delta, delta-star
transformer???
Answers were Sorted based on User's Feedback
Delta - de;ta transfomer is used at Gnerating station or a
receiving station for Change of Voltage , generally it is
used where the Voltage is high & Current is low.
where Delta star is a distribution kind of transfoemr where
from secondary star neutral is taken as a return path .
this configuration is used for Step down voltage phenomina
| Is This Answer Correct ? | 26 Yes | 0 No |
Answer / raj
delta delta transformer is used in generating systems and
transmission systems because voltage is major
consideration(voltage is stepped up to above 11 or 33kv i.e
220 or 440kv) and delta star transformer is a distribution
transformer(stepped down to 11kv or 440v) because current is
major consideration, in distribution systems we need a
neutral, so the neutral point is taken from star connection.
| Is This Answer Correct ? | 18 Yes | 0 No |
Answer / rajendran m
Delta - Delta is 3 phase to 3phase.
Delta - Star is 3 phase with neutral
| Is This Answer Correct ? | 8 Yes | 1 No |
What is the role of the 50 STUB protection at a GIS 400KV substation with SIEMENS protection relays?
IF DISTANCE IS 100METERS B/W AMP.METER AND CURRENT TRANSFORMER WHAT WILL BE AFFECT IN ACCURACY .METER CAN SHOWING ACCURATE CURRENT OR NOT IF NOT WHAT CAN I DO TO GET 100% ACCURACY.
how the inductor will work on dc supply?whether it will work or not?
show me the diagram of three phase wiring and also tell me hoe to take the readings of megger testing
If we say that an cable of size 3.5X 50 mm sq. can take current upto 140 amps,is it the current of single core of the cable or of all the cores jointly.
In a single how much maximum current and watts using
Upto what extent, the lagging power factor can be improved with the help of capacitors?
How will you utilise electrical power? You can start from the generating station.
what is the use of choke on tube light fitting
37 Answers Bhel, Dharma, HSBC, TCS,
Why induction motor is widely used in industry
any body,pls tell me how to done relay coordination ? how to coordinate by TCC curve?how to read the tcc curve?
why should series motor be started with load and shunt motor should be started without load??????
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)