Answer / santhoshkumarv

Code division multiple access (CDMA)
GSM (Global System for Mobile Communications: originally
from Groupe Special Mobile)


CDMA cannot offer international roaming, a large GSM advantage.

Answer / sunil kumar swarnkar

CDMA and GSM are two different technologies and choosing
best is not possible because both have advantages and
disadvantages. Like there is no limit how much customers
can be connected at a time in GSM but more number of users
quality will degrade.
In CDMA only fix nos. of customer can be connected at a
time. And that's why quality will always be good.
Handshaking is easy in GSM so less call drop when changing
the cell.
In CDMA handshaking is difficult so there is more chances
of call drop.

Answer / dileepkumar

>GSM means globel system mobiles ,in this case the antenna
provide 30 to 60 channels at a time i.e;30 or 60 gsm users
are connect at a time..
> the communication process will be
sorce-transduser-transmitter-channel-sattelite-channel-transducer-reciever,
it has much more complex.
>CDMA means code division multiple access i.e;it transmits
the given data in code(i.e;digital(0&1)).
>there consists of fixed no.of channels that is very
less,this is the main draw back of the cdma over gsmm
>The communication process takes place source
source-channel-sattelite-channel-reciever.
>it is nothing but a sattelite phone ,bcoz nobody can track
this mobile.

Answer / vinoth

GSM is Global system for Mobile communications
CDMA means Code division multiple acess
GSM is best technique because gsm in international access
and connect all over the world..
But cdma is used limited no of code division....

Answer / rakesh

Obviously its GSM.....!!!!!!

What is channel coding?

0 Answers  

Why common-collector circuit is known as an emitter follower?

0 Answers  

What is the frequency range of satellite communication?

0 Answers  

negative feedback connections in flip flop

1 Answers  

need previous placement test papers of infosys and soctronics

0 Answers  

Which is the pin no of CN1 TERMINAL and the parameter using in delta servo drive for auto/man input and start forward input

0 Answers   Delta,

The Entropy of the source is maximum when the symbols are...................?

0 Answers   BSNL,

What is the ruturn loss?

4 Answers   Ericsson,

sir, i have completed engineering diploma in electronics and now got the call letter for written exam for the post "junior engineer" from rrb chennai. could you help me about the model and type of questions that i should prepair?

0 Answers  

temperature transmitter range o to 100c over range set value 21.6ma if you give source on the field transmitter showing iop out put also 21.6ma but dcs not showing iop samething if you simulat from hart 21.6ma in dcs showing iop how its possible?

0 Answers  

Explain what is meant by virtual ground in the op amp?

0 Answers  

Alok and Bhanu play the following min-max game. Given the expression N = 9 + X + Y - Z Where X, Y and Z are variables representing single digits (0 to 9), Alok would like to maximize N while Bhanu would like to minimize it. Towards this end, Alok chooses a single digit number and Bhanu substitutes this for a variable of her choice (X, Y or Z). Alok then chooses the next value and Bhanu, the variable to substitute the value. Finally Alok proposes the value for the remaining variable. Assuming both play to their optimal strategies, the value of N at the end of the game would be 27 0.0 20 18

3 Answers   TCS,