WHY THE COLOR OF OUTDOOR TRANSFORMER IS BLUE ONLY???

0 Answers  

---

On what principle electric motor works?

0 Answers  

---

How to run 1ph motor(230 VOLTS its full load amps is 4.5 ampa))with 480 volts main(we didn hav neutral)Thn we go for step down transformer.Our load 10 amps,so we conisder this amps in primary are secondary side?

1 Answers  

---

What is the effect on Power factor and capacitor when your company load is more than 70 % of welding transformer

0 Answers  

---

I want d.g.set our company

0 Answers  

---

why are the transmission lines operated at 220 kv nly... nt les dan dat...

3 Answers  

---

Is it benefitial to supply 210v ac to lighting fixtures instead of 240v ac?

2 Answers  

---

what are the affects of loose connection in electrical circuit.

14 Answers   HP,

---

On load tap changer (OLTC) explode? Transformer Vector group: Ynd11 Rated Power: 353MVA Rated Current: 693A Voltage:294/20KV OLTC Type: T III Y1000 110/c 12193w Max Operation Current: 295A Step Voltage: 550V Arrangement in Tx windings: Y Connection Problem: Damage of Unit 1 Generator Transformer On Load Tap Changer (OLTC) Description of Incident: 9.00 a.m. :- Generator No Load test on excitation system started 10.30 a.m :- Carried out AVR change over test 11.30 a.m :- Preparation for Generator Manual Synchronizing test 12.00 a.m :- Manual Synshronizing test started. Observed incoming generator voltage higher than running voltage. CECR operator operated Generator Transformer OLTC to bring down the incoming generator voltage 12.03 a.m :-Generator Transformer abnormal alarm operated at Gen.Control Desk (CECR) CECR operater at Generator transformer bay informed that the transformer oil splashed out from OLTC. CECR operater informed that he heard explosion inside OLTC. Observed Oil level & Oil Flow alaram operated at Tranformer local annunciator. 12.05 am :- CECR operator 'Open Gen Field Breaker” 12.10 a.m. :- Elec1 team inspected the OLTC and found the OLTC rupture disk was broken and oil spilled at OLTC area. - Elec1 found the OLTC top cover bulging. Do anyone know why and possibility cause happen in this OLTC.

9 Answers  

---

what is the difference between single ratio, multiple core and multiple ratio, multiple core ? please explain.

0 Answers   NTPC,

---

What is dynamo?How it works and what is the function of dynamo in a DG.

0 Answers  

---

Weather power factor correction needed for synchronous motors?

1 Answers  

---