Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379) 37.18kg/qu.cm.Compressive Strength and 10.20% Water Absorption weight,Efflorescence-nil this result use in construction work
1 5961Why 268hp induction motor taking different current in three different phases? (In which two phase having same current and one having higher value compare to other 2 phases.)
1 3570Why do you have to use Protecion relay with the function MTB ( Mechanical Trip Button ) for electrical system.
1 2262how dia of wire and angles are calculated for overhead shielding wire to protect substation equipment from lightening strokes???
1 2115
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
Draw the vector diagramme for Asynchronous Induction Generator at noload,half load and fullload.
documentation on improved trace buffer via Selective Data Capture Using 2-D Compaction for Post-Silicon Debug
hai i am balaji now i applied for the post of section engineer in rrb chennai............ if any body know the question peper and pattern of written exam please send to me
i want to know the syllabus for management trainee exam,vizag steel plant,2009
plz send me interview questions & answers of Data Structure
Yazaki india pvt ltd interview questions qurey related
manhole chamber having height of 2300 mm and thickness of brickwork is 230 mm and dia of opening covering is 560 mm and bottom length vertical is 1500 mm (1:4) brick masonry and plaster 12 mm on both sides..how to estimate the no bricks used with mortar cement bags and sand for total chamber including plaster.
what is the 0 value in quantity surveying
i want computer associates placement papers from u? pls post to me.
PLEASE SEND ME THE TTA EXAMS PREVIOUS PAPERS TO PREPARE TTA2009
please send the IS strandard for electrical to sakthi_murugan86@yahoo.co.in
please send me rrb gorakhpur je teli question paper
i am a student of thapar university final year.can anybody please help me with the exam pattern of the companies:engineers india ltd. ; iocl ; UOP, HPCL. If psbl plz send me the previous years questions on this email id k_arora1987@yahoo.com. i d be really greatful
i need modal Q. paper of junior enjineer for 1/2009 rrb ajmer exam cat no. 11 jell electrical thenkyou