Answer / hardik

case hardened steel has hard case (SURFACE) & though core
that wise it delayed

Answer / siva varun

case hardened steels have compressive residual stress on the
surface which tries to close the crack resulting in delayed
fracture.

Answer / venkat chilla

1.Due to high compressive stress on the surface and very
hard surface the neck or crack propagation on the surface is
delayed during deformation. In general the crack will be
initiated at the core of the material in normal tensile
loading at the region of internal defects and inter metallic
particles. on further increasing the load the crack will
propagate further towards out side of the surface. As the
surface is hard the crack propagation will be stoped by this
hard case and causes to delayed failure .
2. While in fatigue loading the crack will initiate at the
surface and propagate later in to core. As the hardened
surface is not allowed to initiate a crack and so delayed
failure.

Answer / guest

fatigue

IS:1239 same code for MS ERW and Seamless pipes ?

1 Answers  

---

dear sir i need some information about prevent eutectic carbide network(as cast) formation in 12% cr steel casting by another alloying element(my analays: c=1.2-1.4 cr=11-13 mo=0.2-0.4 ni=0.2-0.4 )or break network carbid after formation in solidification by heat tretment please help me my email adress: alloymail@gmail.com

1 Answers  

---

diffrent beetwen eutoctoid &eutectic steel

8 Answers   KRL, Qatar Steel,

---

What is stress corrosion cracking..

6 Answers  

---

How one can differentiate between 304 & 316 grades of steel (physically)?

1 Answers  

---

Any body know when the medicals are starting for the BSI P.O , if anybody got any call letter please let me know

0 Answers  

---

When using mercury to recover very, fine gold from ore, define what is the best way to separate the gold laden mercury from the ore?

1 Answers  

---

How to calculate heat affected zone in weld?

1 Answers  

---

Define grinding.

1 Answers   Essar,

---

Explain a silver and deming drill brit?

1 Answers  

---

How much gold concentration should be in the organic phase (dbc) before reduction by oxalic acid solution? Is it effective on purity of gold in reduction step? Define what is the ratio of dbc to oxalic acid solution in this step?

1 Answers  

---

what are different grades of mild steel available for making machine structure (housing)

1 Answers  

---