Answer / Ashutosh Pandey

Currently, I am an experienced Civil Engineer working full-time for a well-known construction firm. In my role, I design and oversee the implementation of various civil engineering projects.

Does brick grows bigger every year?

1 Answers  

---

what is the size of shuttering?????

4 Answers   SKV Builders and Development Pvt Ltd,

---

what should be RCC material i.e iron rod(mm)x cement x stone x sand for laying of slab L 42'x B 22'x tk 0.375ft = 1nos & column of H 17'x15"x8" 2nos.

1 Answers  

---

1) what do you mean by rolling margin of steel ? 2)pls. tell the cut length formula of stirrups as per IS codes(take out cut length for a beam of 600*300mm with 40mm cover all sides)? 3)what is the multiplying factor of painting for sand faced plaster? 4)if your footing is of size1.9*1.6m . what quantity of length and width you will excavate means what extra margins you will allow as per IS codes in billing?

1 Answers  

---

What is ideal location for cube casting, RMC vehical at Ground Floor and Slab casting at 40th Floor

7 Answers  

---

HOW TO CALCULATE THE CEMENT & SAND REQUIRED FOR 1SQM BLOCKWORK OF 200MM THICK?

1 Answers  

---

For 100 bag cement how i will calculate sand and metal aggregate.Mixing proportion 1:1.49:2.38

1 Answers  

---

What is the withdrawal force of steel nails?

1 Answers  

---

) Design a gussetted base for a column section consisting of one sc 250 with two cover plates 300 x 25 mm carrying an axial load of 2500 KN. The S.B.C. of soil is 250 KN/m2 and the permissible bearing pressure on concrete is 4000 KN.

1 Answers  

---

If we are providing concrete joint in every 10m with water stopper in water tank wall then is it necessary to cut the steel at joint section?

1 Answers   Talib and Shamsi Constructions,

---

What is missing report and how to prepare

1 Answers  

---

What in bending moment, if a moment is free end of cantilever beam?

1 Answers  

---