Answer / Shadab Faisal

A detailed control schedule for an 11kV panel would depend on the specific panel and its associated equipment. Here is a general outline of steps that might be included in such a schedule:nn1. Verify that all protective relays are set correctly.n2. Ensure all circuit breakers are open before energizing any equipment.n3. Close the main circuit breaker to bring the panel online.n4. Close each feeder circuit breaker one at a time, allowing each load to come online sequentially.n5. Perform a visual inspection of the panel and its components to ensure proper operation.n6. Record all readings from meters and recorders for future reference.n7. Perform any necessary maintenance or troubleshooting as needed.n8. When finished, open each circuit breaker in reverse order to shut down the panel.

Currently what is the highest capacity (MVA) of SPPg generator available in the market?

1 Answers   SPPG,

---

why the carbon brushes are used heat created rotating parts in eiectricity

1 Answers  

---

how to caculate cable size for diff types of loads? if anyone know the calculating procedure please tell me

1 Answers  

---

What are the different types of transformers present in the Transmission and Distribution system?

2 Answers  

---

the input mechanical power of a single alternator is increased,its RPM increased but in case of an alternator synchronised with grid its RPM does not increased with increase of input mechanical power. why?

3 Answers   Bhel,

---

What is mean by hot and cold loop testing?

1 Answers  

---

checklist of ELCB

1 Answers   EECE,

---

Assuming that a dedicated neutral earthing transformer is provided for each GT generator, when the two generators are running in parallel, has consideration been given that the earth fault current from one generator stator winding be split between the two neutral earthing transformers? If so, what adverse impact will this have on the operation of the 59N and 27TN devices?

1 Answers   Quest,

---

The ripple frequency in output of fullwave bridge rectifier is a. Half the input b. Twice the input c. Same as input

1 Answers  

---

what is vtg limit of earth and neutral at transformer side?

1 Answers   IOCL,

---

DIFFERENCE BETWEEN POWER AND CONTROL CABLES

9 Answers   NCC,

---

Can we convert off load tap changer transformer to on load tap changer transformer

2 Answers  

---