Answer / alok

the tendency of alternater current to concentrate near the
surface of a conductor is known as skineffect.

Answer / raj

Generally the conductors are composite in nature, means it
is made by multiple coil twist one onother.When alternating
current, passes through the conductor then more fluxes cut
by the inner coil than the outer.So, the inductance
(L=Nxflux linkage/i) of the inner conductor will be more
and also reactace(X=wL) will be more.For that reson less
current will flow innersurface of the conductor than
outer.That is call skin effect.

Answer / tigernitin87

4th ans is correct abt skin effect
ans of 2nd ques
R(ac)is proportional to sq. root of frequency
in dc f=0 so R(ac)=0
hence current is distributed uniformly

Answer / madan

Skin effect appears in conductors carrying Alternative
currents. as its name shows, current flows through the
surface rather than through the whole cross sectional area
of the conductor. it happens because of electromagnetic
effect of AC. Due to it inductance of conductor is more at
the centre and it decreases as reaches to surface of
conductor .thats why in AC current flow on surface of
conductor.

AS we know inductance of conductor in dc is zero. so
current has no oppostion so it flow through whole
crossectionl area of conductor

Answer / rama krishna

The skin effect is the tendency of an alternating electric
current (AC) to distribute itself within a conductor so that
the current density near the surface of the conductor is
greater than that at its core. That is, the electric current
tends to flow at the "skin" of the conductor. The skin
effect causes the effective resistance of the conductor to
increase with the frequency of the current. Skin effect is
due to eddy currents set up by the AC current.

Answer / gaurav naik

Hey first 3 answers are wrong i guess....

current flows from outer layer and not inner layer due to
skin effect.

That is why we make iron core as mid core in ACSR
conductor's as current flows from outer layers (i.e
aliminium)

Answer / kunal varshney

Skin effect appears in conductors carrying Alternative
currents. as its name shows, current flows through the
surface rather than through the whole cross sectional area
of the conductor. it happens because of electromagnetic
effect of AC. Due to it inductance of conductor is more at
the centre and it decreases as reaches to surface of
conductor .thats why in AC current flow on surface of
conductor.
as we know that reactance is zero that is the effect oo
inductance is zero therfore their is uniform resistance in
& on the surface thats why skin effect is absent

Answer / shiny

The tendency of the AC current to concentrate along the
surface of the conductor is called skin effect.
The apparant resistance of AC is always higher than
DC .The alternating magnetic flux created by an ac current
interact with the conductor , generating a back emf which
tend to reduce the current in the conductor . The center
portion of the conductor is affected by the greatest
number of lines of force.The electromotive force produce in
this way by self inductance varies both in magnitude and
phase througr the cross section of the conductor, being
larger towards the centre and smaller towards the outer .so
the flow of current is maximum in the outer surface of the
conductor ,called as skin effect

In dC there is no inductance an dno skin effect.

Answer / anonymous

In skin effect the current density is way more on the surface rather than in the core of the conductor..
Remember that skin effect is caused by eddy currents. We know that these eddy currents are induced by the alternating current.
This is obviously caused by the frequency of ac. So there's no skin effect in dc..

Answer / karthik

The current flow in a multi-stranded conductor tends to flow
more on the outer surface than in the inner surface.This is
due to the reason that the flux linkages in the multi-strand
conductors cancel each other in the inner strands than on
the outer strands.Due to this the current flow varies.Also
no alternating fluxes are produced in DC current flow.So the
skin effect is not defined for it.

How much Fault current can be contributed by a motor?

4 Answers  

why we not connect the 12 V batteries in parallel to get the more backup supply for an UPS ? wheter off line or on line UPS ?

2 Answers  

What is Scheme Test of High Voltage Switchgear. Which tests it includes.

0 Answers   Siemens,

What is surger vector in 33Kv transmission feeder? We have AC power generator of 8MW which is paralleled with 33Kv EB grid. Some times our HT breaker gets trip off due to surge vector problem. How to over come it? Is there any device to observe the surge and avoid tripping?

3 Answers  

what is the principal of star delta starter?

9 Answers  

I have one ct of ratio 3000-2000/1 Amp its knee point voltage mentioned on name plate is 500-333/30mA-50mA at Vk/2. in secondary box there is three terminal named 1S1, 1S2, 1S3 then on which terminal obtained the knee point voltage ie 1S1-1S2 OR 1S1-1S3 & also specify the knee point voltage for the ratio 3000 from name plate.

0 Answers  

sir, 3phase induction motor takes different pf and different KW in three phase while running,explain reason

0 Answers   UltraTech,

The unit of quantity of electricity is the:(a) volt(b) coulomb(c) ohm(d) joule

1 Answers  

what is different between synchronous & asynchronous motors

3 Answers  

how capacitor active and reactive.

1 Answers   Birla,

What does OHB stand for in specifications for circuit breakers, especially found in SF6 circuit breaker?

1 Answers  

which %age of corona losses increses if frequency is increased to 25%.

3 Answers   ADCET, Maihar Cement,