Answer / Santosh Kumar Mishra

The amount of water required to cure a 1000 sq ft concrete slab depends on the specific mix design and environmental conditions. As a rough estimate, a common mix design requires about 25 gallons (94.6 liters) of water per cubic yard of concrete, with an average density of 145 pcf (pounds per cubic foot). Given that there are approximately 9 square feet in one square yard, a 1000 sq ft slab would require around 109.7 cubic yards of concrete. Using the water-to-concrete ratio mentioned above, this amounts to roughly 2845 gallons (approximately 10,637 liters) of water for curing.

Water absorption for stone and first class stone bricks?

2 Answers  

---

Structural steel: For a thumb rule check in field, the allowable weight which can be hung down for 10mm dia mild steel rod, of yield value of 0, 25 KN/mm2 and applying a factor of safety 2.00, will be how many kg?

3 Answers  

---

what will be the quantity of following materials in P.C.C for the total area of (100'x70'x 0'4") 1)NO. OF CEMENT BAGS 2)SAND IN CU.FT 3)METTLE IN CU.FT

0 Answers   Pratibha Industries,

---

within an emergency scenario what are the safe systems of work a coss can setup as part of is duties

1 Answers  

---

where does the hinged action while designing the strture

2 Answers   DLF,

---

can any one tell me how to estimate the reforcement of circular slab and also for dome.

1 Answers  

---

How do you change a dimension value in solidsworks?

1 Answers  

---

How to Calculate no.of bricks in 1sq.mtr

3 Answers   SADC,

---

What is meant by Crystal Concrete?

1 Answers   Jain Housing,

---

Significance/Uses/effect of Rolling Margin ?

1 Answers  

---

how to calculate 1 cubic meter rcc concrete 1:1.5:3 ratio ,how much aggrates and sand , quanitites

3 Answers  

---

why is the column design?

1 Answers  

---