Answer / mustafa

It is nothing but magnetic saturation
any increase in current above certain level will not have
effect in the magnetic circuit.
The instrument does not work in the faulty condition due to
saturation and circuit to be protected will get damaged.

Can anybody explain me the electrical circuit of indian railways to drive electrical engines(LOCOMOTIVES)? How does overhead lines work in the circuit to drive different trains on the same track?

1 Answers  

---

Why Capacitor & ignator used in MH lamp

2 Answers   Bell,

---

why the earth terminal in three pin top is longer than rest of the two terminal and of bigger size?

6 Answers   BARC, MAHINDRA,

---

which are the criterias needed to select the kind of neutral earthing(solid earthing,resistance earthing,etc.) at various voltage levels in electrical distribution?

0 Answers  

---

What is the actual meaning between the energy conservation and energy saving ?

3 Answers  

---

---

why do you add the load short circuit impedance when considering short circuit amperage. It seems that you should only consider supply. If you need to consider loads and you don't know what loads are to be added , what would be a good sub-transient reactance rating for the loads?

0 Answers  

---

Can XLPE/SWB/PVC (P3) 7C X 2.5mm2 be replaced by Can XLPE/SWB/PVC (P2) 7C X 2.5mm2??? P3 vs P2

0 Answers   PCSB,

---

An 11kv system consisting of an underground cable to a sub station about 300 meters away was shut down for about 10 hrs. On energising, it tripped off on earth fault about 10---20 mins later 6 times but since than it is not tripping.its already 3 weeks now. The SPAJ was found to be fine. what could be the cause.No test had been done to determine the cause of the trippings till now because of demand.

2 Answers  

---

what is real time system type definition

1 Answers  

---

How I design capacitor bank for different load.7MW connected load.

3 Answers   Samtel,

---

Q: How to calculate Transformer losses , tell us by Formula.

0 Answers  

---

Why does increasing the magnetic flux in the main field of a d.c motor cause the armature current to reduce??

0 Answers  

---