Answer / Aadesh Kumar Singh

Capacitor-start induction motor (CSIM) is a common type of capacitor-based motor used in fans and other appliances. Here's how to check it:
1. Disconnect the power supply.
2. Remove the capacitor from the motor, ensuring safety measures are followed.
3. Use a multimeter to measure the voltage rating of the capacitor, which is usually printed on the capacitor itself.
4. Set your multimeter to the capacitance setting and connect it across the terminals of the capacitor.
5. Read the value displayed by the multimeter, which should match the voltage rating if the capacitor is good.
6. If the measured value is significantly different from the rated value or if there is no reading at all, the capacitor needs to be replaced.

What are the different lines and what are the different types of losses occur on them?

2 Answers  

---

what is SWA type of cable?????

4 Answers  

---

how to do the ductor test?

1 Answers  

---

What is meant by system?

1 Answers  

---

how to calculate current when LT supply 415v fed to HT Motor 6.6kv and 1120kw.

2 Answers  

---

why the Different manufacture's rating of Gas genset are different? i.e : cummins genset rating is in KVA .( 625kv). While GE- Jenbacher make genset have rating in Kw. (625 kw)

1 Answers   L&T,

---

for compensate 315mh inductance ,how many capaciance required?

1 Answers   Mitsubishi,

---

What are the role of each components in PID COntroller

1 Answers   BARC,

---

how can findout cable fault Location only useing MEGGER

3 Answers  

---

will the introduction of capacitor bank parallel with the induction load reduce power consumption

4 Answers   Nokia, WAPDA Water and Power Development Authority,

---

How Size of Busbar is determined for a particular load.

2 Answers  

---

If the generator will not synchronize, what will you do?

3 Answers  

---