Answer / mohan

it is used to separate solid particles from liquid by the
pressure forese,here filtration area is more

Answer / sachin agam

pressure filter is just a filteration equipment which is use
for filtering the reaction mass using an air pressure to
separate the suspended solids from the solution...the
filterate is used again.

Answer / virendra chauhan

to stop the impurities getting in the system.

Answer / m.s.r

saperate the solids friom slurry with help of presdsure

Answer / nilesh

It is use of remove the impurities form systeam.

Answer / vinothkumarbbsva

It is used to filter the mass volume of continuous flow of influent with short time than other filters...

Answer / sakhi

To stop dut from getting in the system

what is the apt definitions for apparent power ,active power and reactive power?and explanation about different types of lamps?

1 Answers  

what is vacuum....?

6 Answers   UPL,

Question 30 – Solve the simultaneous equation using simple Excel program : r + s – t = 7, 2r – s = 0, 3r + 2t = 15. Explain the use of functions of MINVERSE and MMULT together with the keyboard C (Ctrl) + S (Shift) + E (Enter).

1 Answers  

QUANTUM COMPUTING - EXAMPLE 32.7 : If | ± > = 0.707 ( | 0 > ± | 1 > ), prove that | Ψ (t = 0) > = | 0 > = 0.707 ( | + > + | - > ).

1 Answers  

if the length of a pipe doubled what will be the effect on Pressure in line?

7 Answers   ISRO,

Question 69 - A well delivers 225 US-gallons per minute of water to a chemical plant during normal system operation. (a) Calculate its flowrate in the unit of mega US-gallon per day or MGD. (b) The following formula is written next to the chlorine feed point : (chlorine feed rate, lb / day) = (flowrate, MGD) X (dose, mg / L) x (8.34). If this formula is correct, then what should the chlorine feed rate to be in pounds per day (lb / day) if the desired dose is 2 mg / L. (c) Prove by calculations that the constant 8.34 in the formula next to the chlorine feed point is correct. Let 1 US-gallon = 3.78541 L and 1 mg = 0.0000022046 pound.

1 Answers  

How can one determine the particle size distribution for a given bulk solid?

1 Answers  

what is difference between B.Tech. and B.E. in chemical engineering

3 Answers   ONGC, Reliance,

if i added hypo before DM plant so i will affect my resins of anion or cation. if affect it so do prevent what kind of step should be taken to remove hypo before DM inlet?

1 Answers   Hindustan Unilever Limited,

pls send me HPCL & reliance test paper for chemical engineering.....

4 Answers   BCPL, HPCL, NOCL, Reliance,

MASS TRANSFER - EXAMPLE 4.1 : A concentric, counter-current heat exchanger is used to cool lubricating oil. Water is used as the coolant. The mass flow rate of oil into the heat exchanger is 0.1 kg / s = FO. For oil, the inlet temperature TIO = 100 degree Celsius and the outlet temperature TOO = 55 degree Celsius. For water, the inlet temperature TIW = 35 degree Celsius and the outlet temperature TOW = 42 degree Celsius. What is the mass flow rate of water in kg / s, FW needed to maintain these operating conditions? Constant for heat capacity of oil is CO = 2131 J /(kg K) and for water is CW = 4178 J /(kg K). Use the equation (FO)(CO)(TIO ?TOO) = (FW)(CW)(TOW ?TIW).

1 Answers  

What is an additive?

1 Answers