Answer / wali

who we can change steel dia for example in design we have 16mm ,but at the site we have 12mm who we can replace it?

What the approval that owner will give to contractor during construction project period? What will the affect on project if delays due approvals?

2 Answers  

---

For 1:2:4 ratio the weight of cement is 50 kgs then how many kgs are the weight of sand and aggregate

4 Answers   Lanco, Reliance,

---

i want measure water capacity in 25'diameter and 7'height of water in circular storage tank in liters how?

7 Answers  

---

A doubly reinforced concrete beam is 25 cm wide and 50cm deep to the centre of tension reinforcement. The centre of compression is steel is 5cm from the compression edge. The areas of the compression and the tension steel are 10.16cm2 and 12.56 cm2 if m=18 and the bending moment at the section is 7,000,000 N-cm. Calculate the stress in concrete and steel.

0 Answers  

---

Which stone is best for wall construction Laterite Stone or Cement Blocks

0 Answers  

---

---

During reclamation how can the occurrence of mud waves can be rectified?

0 Answers  

---

why steel is used in rcc columns? what is its purpose?

3 Answers  

---

how much least count of levelling ?

5 Answers   NCC,

---

wat happens to the foundation when only live & dead loads are considered( wind load is excluded) during the design of tall structures. options are: a)only settlement in the internal structure and not external structure b)only settlement in the external structure and not internal structure c)no differential settlement d)none of the above

4 Answers   BBJ Construction, IOCL,

---

If I want to lab 16 mm dia. bar with 20 mm dia bar with 40D lap length which dia.should I consider for lapping

12 Answers  

---

which type of test carrying on the cement & why

1 Answers   LG Soft,

---

a solid steel rod length 2m dia and 20mm vertically hangs from celling and has a collar firmly atteched to it. above the collar an annular rubber washer of 40mm th. having stifness k = 5n/mm is placed. determine maximum stress in the rod caused by mass of 5 kg falling through a height of 1.2m.

0 Answers   Sail,

---