Answer / Sagar Agnihotri

Calculating the boil-up rate (BUR), diameter, and height for packed and tray distillation columns involves complex engineering calculations. Here's a simplified overview:

1. Identify the key variables such as feed flow rate, temperature, and composition; product flow rates, temperatures, and compositions; and column dimensions (diameter and height).
2. Choose the appropriate mathematical model for packed or tray columns based on your design requirements. For packed columns, you can use the HETP (Height Equivalent to a Theoretical Plate) method, while for tray columns, you can use the McCabe-Thiele diagram or the Batch Distillation Simulator.
3. Input the variables into the chosen model and perform the calculations to determine the column dimensions and boil-up rate.
4. Consult reference books like Perry's Chemical Engineers' Handbook or Design of Distillation Columns by R. H. Baty for detailed explanations, examples, and advanced techniques.

How much experience you are having in commercial software for protein design?

0 Answers   Aliens Group,

---

Where barrel pump use?

1 Answers   Deepak Fertilisers,

---

Question 84 - In Mendelian genetics, yellow (Y) is dominant to green (y) and round (R) is dominant to wrinkled (r). (a) What is the probability P of Rr x Rr producing wrinkled seeds? (b) What is the probability P of Yy x yy producing green seeds? (c) What is the probability that RRYy x RrYy would produce RrYy?

1 Answers  

---

What are some common causes of control valve noise?

1 Answers  

---

what is designing step of heat exchanger

1 Answers   Reliance,

---

could any one plzz give me the placement tech papers taken by iocl,and bpcl in chemical stream..... my id is.... mishra.gaurang@gmail.com

1 Answers  

---

What are some common precipitating agents used to remove metals from aqueous waste streams?

1 Answers  

---

can any chemical engineer become IES

5 Answers   IES,

---

How instrument air is continually supplied in process plant?

1 Answers  

---

Explain how can you separate hydrogen peroxide into hydrogen and oxygen?

1 Answers  

---

Why reflux is necessary in distillation column?

1 Answers   Deepak Fertilisers,

---

According to Shockley equation, the I – V characteristic of a diode is approximated by I = IS [ exp (nVD / VT) – 1 ]. For silicon, let the reverse bias saturation current IS as 0.000000000001. If n is ideality factor with value of 1.5, VT as thermal voltage drop of 0.026 V at room temperature, what is the value of current I that passes through the silicon diode in the heater of evaporator when the forward voltage drop VD = 0.026 V? Please take note that exp is the exponential function with e(1) = 2.718, e(2) = 7.389.

1 Answers  

---