What is the following which is printed on electrical
appratuses like AC21 ,AC 23 , etc ?



What is the following which is printed on electrical appratuses like AC21 ,AC 23 , etc ?..

Answer / a.p.nanjappa

it is the contractor rating .
Refer to IEC standards as mention in the catalogs.
It is the recommendation of electrical standard to select
the device rating,type.

Is This Answer Correct ?    1 Yes 0 No

Post New Answer

More Electrical Engineering Interview Questions

What it is the diff btw Package & PEC AC's????

2 Answers   Emerson,


if power factor comes in leading & showing -0.95. Is there any effect on electrical system? if yes, then please tell me what would be the effects. & how long we keep power factor in leading. Keeping power factor in leading shows more KW & less KVA is it correct or not.

2 Answers   Jakson,


What is power factor ?What are the benefits of improved power factor & how. Please explain with examples.?

5 Answers   ABB,


working principle of oil startar

0 Answers  


What do you mean by power transformer?

0 Answers  






what is the use of reactive power

3 Answers  


what is the difference between capacitive and resistive voltage divider?

0 Answers  


what factors to needed while selecting a MCB and MCCB

3 Answers  


What is auto transformer?

7 Answers   L&T,


if voltage is not builed up in small generator what will be the reason?

7 Answers   century,


We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?

0 Answers   Siemens,


why tan delta test conducted in electrical equipmenr

4 Answers  


Categories
  • Civil Engineering Interview Questions Civil Engineering (5085)
  • Mechanical Engineering Interview Questions Mechanical Engineering (4451)
  • Electrical Engineering Interview Questions Electrical Engineering (16632)
  • Electronics Communications Interview Questions Electronics Communications (3918)
  • Chemical Engineering Interview Questions Chemical Engineering (1095)
  • Aeronautical Engineering Interview Questions Aeronautical Engineering (239)
  • Bio Engineering Interview Questions Bio Engineering (96)
  • Metallurgy Interview Questions Metallurgy (361)
  • Industrial Engineering Interview Questions Industrial Engineering (259)
  • Instrumentation Interview Questions Instrumentation (3014)
  • Automobile Engineering Interview Questions Automobile Engineering (332)
  • Mechatronics Engineering Interview Questions Mechatronics Engineering (97)
  • Marine Engineering Interview Questions Marine Engineering (124)
  • Power Plant Engineering Interview Questions Power Plant Engineering (172)
  • Textile Engineering Interview Questions Textile Engineering (575)
  • Production Engineering Interview Questions Production Engineering (25)
  • Satellite Systems Engineering Interview Questions Satellite Systems Engineering (106)
  • Engineering AllOther Interview Questions Engineering AllOther (1379)