Answer / gopal

bushing which is used to insulated the terminal to the
transformer body,it is made my porseline.the size of
bushing depand upon the input output voltage

Answer / suchit kumar sau

bushing is an insulator which protects the transformer tank
from being connected with live suppy terminals.generally
made of porcelin,having conductor rod through the channel
inside it and also having a current transformer
arrangement.oil is filled between the connecting rod and
inner cylindrical surface of porcelin cylinder. the
porcelin cylinder has a petty coat shape to protect this
unit in rainy days. In a word, bushing is a protecting
insulator which protect the tf from flashing over.

Answer / sindhejs

Bushings are the insulators provided between transformer
tank(or panel) and live conductors both primary and
secondary sides of the transformer.

Answer / raj

Bushings are useing only instator provied between t/r
boby..

Answer / kabir0921

Bushing is an arrangement in transformer which provides the
path of conductor from high voltage line to transmission line.
It protects the transformer from flash over.

Answer / raj

bushing is the instrument that is an insulator between the
tf tank and primary and secondary windings

Answer / m.baskaran

bushing is the instrument that is an insulator between the
tf tank and primary and secondary windings


Is This Answer Correct ? 0 Yes 0 No

why we use stones or rock pieces in transformer area?

10 Answers  

How work of capacitor in dc supply...???

0 Answers  

how the testing of CT OF 400/200/100 done in33/11 kv s/s

1 Answers   Reliance,

i want to run 11kv star connected motor in 6.6kv with delta connected throught inverter, is it possible?

0 Answers  

In three pin plug 6 amp. 220V ac rating. Why earth pin diameter is higher than other two pin? What its purpose ?

0 Answers  

how to reduce earth resistance in sandy soil.

1 Answers  

In Dyn11 power transformer if any one of the 3 phases connected to earth in star connected side then please explain effect of the current flow in delta connected side of transformer.(In this case if one phase is shorted to ground in star connected side then we observe the current flow in two phases only not three phases in delta connected primary side. Please explain why it is so?)

0 Answers  

Why is the earth fault relay connected to the Yellow Phase?

4 Answers  

what is safety measures of alternator.

10 Answers   HP, MNC,

My switchgear busbar is rated at 2000A and just imagine the actual load on busbar is 1000A. From that busbar there are 10 outgoing feeders. Now the question is will the load be 1000A on each outgoing feeder or 100A per outgoing feeder. 2nd thing how do i calculate the load on individual feeder. Thanks for your time. Please provide some clarification on this issue.

1 Answers   Alstom,

How to check op amp using multimeter

1 Answers  

As per IS why should the control be taken only from R phase, why not from B or Y phase??!!

2 Answers