What is the difference between Normal Concrete and High
density concrete?
Answers were Sorted based on User's Feedback
Answer / ds raju
Density of normal concrete in between 2400 to 2600 Kg/Cum.
For High density concrete, density not less than
3600Kg/Cum. In general this type of concrete will be used
in Nuclear related structures like Nuclear Power Plants,
etc.
| Is This Answer Correct ? | 13 Yes | 0 No |
Answer / b.srinivasarao
density of normal concrete is in order of about 2400 kg/cu
mt and high density concrete is ranging from about 3360-
3840 kg/cu mt ,whuch is about 50% higher than the unit
weight of normal concrete.the high density concrete is used
in the construction of Radiation shields.
Note: density of light weight concrete will be less than
1900 kg/cu mt
| Is This Answer Correct ? | 2 Yes | 0 No |
What is the neutral axis depth factor formula
1. For 10sq.m area(47 kg bitumen contain) of 45 mm thick bitumen mix layer..how much bitumen is required for 1600 sq.m and how much aggregate need for that ?? 2. And much tonnage of bitumen mix required for 10 sq.m area of 45 mm thick. Please give answer...
what is the ratio of cement water and sand in RCC?
what is shear force
2 Answers NLC Neyveli Lignite Corporation Limited,
a) we have 30nos., 300mm dia, 4m length double under reamed piles.calculate excavation quantity.b) tell concrete qty. also.
how to calculate the density for high density concrete ? or is it same as the density of RC?
How does siphoning work?
1.what is the main responsibilites of Site Engineer ? and what are main attitude ?
1)Why we can use half brick in 4inch wall and 2)why not in 9+inch brick wall
How we can calculate the quantity of sand, & cement, & also aggregate for a slab. Length 25'/3.28 = 7.62 Mtr width 20'/3.28 = 6.09 Mtr depth 6" /3.28 = 0.152 Mtr
how did find the quantity of cement ,sand , and aggregate in concreat which is givan by volume
A floor has to be removed partially with block work tying floors together, can block work continue on floor that has to removed excluding demolishing works tying floor from underside of slab and top of slab demolishing floor upon completion?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)