Answer / madhu

FACTS is Flexible Alternating Current Transmission System.
Now a days this is used for power transmission with reduced
number of losses. STATCOM, UPFC, SVC, TCSC, SSSC all these
are some of the FACTS devices. Various sites are available
now to understand the FACTS devices...

Answer / visaw

these are used to reduced the losess and than improve
system relaibilty and reduced the power bill , STATCOM,
SVC. are the FACTS devices.

What is the difference between AVR and Servo Stabliser

3 Answers   Wipro,

---

Send me Model Question paper for the post Scientific Assistant in NPCIL

0 Answers  

---

1. alternator has full load regulation of 4% when pf of the load is 0.8 lag, 1500 rpm. full load regulation of 1400 rpm for 0.8lag will be ________ ?? 2. torque angle of a sync m/c operating from a constt voltage bus is usually defined as space angle between _______ . 3. method most effective in finding out no load losses in large DC shunt motoris ______ . 4. current carrying capacity of fuse material depends on ______ . 5. coil has res. 10 ohm, inductance 1H. what wil be current after 0.1sec after switching on to a 500V DC SUPPL ? ? 6. effect of phase lag compensation on servo systems ___________ . 7. rotor of a dc machine is usually supported upon ______ . 8. DC motor is preferred to AC motor in which application ?? 9. 3 nos of 10:1 Xmer are connected in Star-Delta to supply a load at 230V.the supply voltage must be ______ . 10. voltage source produces max current in which circuit. 11. cal. power, if current and voltage are out of phase by 90 degree. 12. suitable length of Xmission line of power at 66 KV. 13. Which of the theorm helps in simple computation when the load across a ckt is varying ?? 14. what is the adopted line length for power Xmission of power by cables ??

5 Answers   TATA,

---

what is the lemen of a single 5mm 13000mcd white led pls reply

1 Answers   Eskom, Sona,

---

Should power factor be low or high?

0 Answers  

---

testing of transformer

1 Answers   Vijai Electricals,

---

what is the minimum voltage require to injure our body?

4 Answers  

---

WHY ARMAD USE IN CABLE

4 Answers  

---

During Testing of Maintenance Free Earthing, How deep should be the Spikes of Earth Test Meter should be inserted in the soil(one spike is 15 Meter & Other spike is 30 Mtrs away from the Main Earth Electrode. Because, recently, we observed that when spike is inserted 3-4 Inch in the earth- results are better, If spike is inserted 1 feet deep than results are increasing.

0 Answers  

---

difference between high and low impedance BUS BAR relay??

0 Answers  

---

1000kva = how much kvar

3 Answers  

---

How to select busbar?

2 Answers  

---