Answer / shanmugam

for 1m3 of brick work = 500 nos needed but it is theoritical only, 490 bricks is needed, to check this take total volume of brick work and then count the no how much brick is needed for that volume and then covert it for 1m3 volume you will get doubts clarified

Answer / thenraj

size of bricks with joint = 0.241*0.126*0.088,Number
of bricks =1 /(size of bricks with joint) = 1 /
(.241x0.126x0.088) = 1/ (0.002672208) =374.22 / cum we
take 375 number of bricks / cum

Answer / deepak

size of bricks with joint = 0.241*0.126*0.088,

Number of bricks =1 /(size of bricks with joint)(i am
taking half thickness of a joint with a brick size)
= 1 /
(.235x0.120x0.082)
= 1/ (0.0023125)
=432.43 / cum we
take 432 number of bricks / cum

Answer / suresh bariya

Given Size of brick = 0.229m X 0.114m X 0.076m
Considering the brick wall thickness is 114mm
Size of brick with 12mm mortar = 0.241m X 0.114m X 0.088m
Volume of brick with mortar =0.0024 m3

Volume of brick wall with mortar =1 m3

Volume of brick wall with mortar /
No's of brick in wall = --------------------------------
Volume of brick with mortar

= 1/ 0.0024 =413 no's

Answer / harpreet singh

as per PWD there is 462 bricks in one cubic meter in there measurement book they take 462 no. of bricks

Answer / rahul chaudhary

Volumn of one brick with mortar= .241×.126×.088=0.002429 m^3
So the no of bricks in 1 cum= 1/0.002429 = 411 nos + add 5% wastage
= 411+20.55 =431.55 nos

Answer / pankaj tiwari

Bricks size-229mm*114mm*76mm, Volume of brick=0.001958

Volume of brick with mortar -241MM*126MM*88MM=0.002672
1M3 Required No,s of Bricks with mortar =374.25
1M3 Required No,s of Bricks with out mortar =510.72

Answer / guest

Hi
R u aware of faloowing things
1:Naminal thickness and Actuval tickness of wall?
2;Dry volume of mortor ?
3: Extra mortor rqd forg filling ?
4:westage norms of different meteriels?
5:Standard jont thickness in maasonary wall if yes R u
aware of practical thk ness maintained by masons on site
All thise factores we have to considere then only we ll
able get rqd qty of metereal

PLs dot miss guied the people

Structural steel: For a thumb rule check in field, the allowable weight which can be hung down for 10mm dia mild steel rod, of yield value of 0, 25 KN/mm2 and applying a factor of safety 2.00, will be how many kg?

3 Answers  

What is the proportioning by weight of 1:2:3 concrete mix design of cement, sand, gravel, and water in metric for a 3000 PSI concrete strength and a target slump of 75-100mm?

2 Answers  

how much quantity of work we can get by rod benders per day

3 Answers   IVRCL, NCC, OWDM,

how to calculate the quantity of plaster.

3 Answers   DB Realty,

HOW TO MIX M20 GRADE CONCRETE BY HAND? USING BOND.

1 Answers  

Define What is a projection line?

0 Answers  

List out some of the common problems that architect have to tackle it?

0 Answers  

what is scour depth $ what's the process to determine it?

2 Answers  

An invisible line should intersect a visible line with

1 Answers   PSC, PSCI, SPC Systems,

how to calculate quantity of cement and sand for plastering works in CM 1:6 proportion.....plz answer anyone.....and write the formula...

4 Answers  

An interior designer designed a rack with the given dimensions. The dimensions are in feet. This coplanar frame repeats at every 5feet and constitute a space frame. The total length is 120feet. Which steel member will you suggest? A square bar, A square tube or a circular tube. Explain.

0 Answers  

Will going from a 3-tap to 6-tap increase water pressure?

0 Answers