How to decide the rating of CBCT?
We have 6.6Kv switchgear & having 50/1 cbct ,i want to know
how this 50/1 A came? On what basis we decide CBCT reting?
Answer / pps
CT ratio will be determined by the maximum current the ckt.
will carry.
Is This Answer Correct ? | 7 Yes | 5 No |
How to differentiate 220 Kv & 132 Kv line transmission tower if there are no specifications given on towers?
difference between silent and non silent pole rotor?
Is a current transformer step up or step down ?
capacitor is load free component but why ampare meter shows current when capacitor bank breaker close?
How to select the releases for MCCB ?
In electrostatic precipitator why positive terminal of tranformer rectifier unit is grounded?
Can Dy11 and Dy1 vector group transformers be paralleled?
What is the use of Isolation Transformer, and Neutral is using for return path, finally this current is going.... but same time the voltage of the neutral should be below 1 V...
What is the basic principal, by which DC voltage level is increased more than the supplied AC voltage during conversion. As upto AC level it is contorrled by firing anlge but after maximum level how is it possible.Please clear picture. OR we have to supply the higher level AC?
what is diff b/w electrical & electronics ?
What is the meaning of BREAKING and MAKING CAPACITY in case of CIRCUIT BREAKERS.
I have a generator of 300kw.400V,50hz . what is means can i assume the load Red Phase with Neutral 300kw.Yellow phase with neutral 300kw and Blue with neutral also 300Kw. or - red with neutral 100kw same as yelloe and blue phase also giving 100kw with neutral respectively