Answer / im

in squirrel cage : rotor winding i.e., heavy copper bars are short circuited so that current is not equal to zero , thus we obtain magnetic field around those copper bars as some current flowing through it.which opposes rmf and starts rotating.

in slip rings: in rotor there will be a starred connection of copper conductors , the other ends of this conductors are connected to slip rings upon which the brushes are mounted.
these brushes are connected to 3 phase supply via rheostat(used to increase resistance). when the motor is ON due to resistance provided by rheostat the motor produces much torques initially after some time the brushes are umounted from sliprings , and all these 3 sliprings are short circuited by means of metal collar. thus this is now same as squirrel cage i.m

Answer / abdullah al-ansari

in squirrel cage rotor conductors are joined to gather
but in slip ring not joined.
in squirrel cage addition of external resistance is not possible but in slip ring is possible.

Answer / waheed khan

Both have 3 a phase stator winding, the squirrel cage has a rotor with bars arranged around it's periphery, these bars are joined at both ends by a continuous ring. This forms a closed circuit of low resistance which is fixed. The wound rotor (slip ring motor) is similar in construction but the bars are replaced by copper windings, similar to those in the stator. They are star connected and the three ends are brought out to slip rings which allow an electrical connection to be made to the outside world. When no connection is made between these ends and the stator is energised, little current flows in the stator which does not turn, but when some resistance is inserted, current flows in the stator windings and the rotor rotates. As the rotor gains speed the resistance is taken out of circuit and the slip rings shorted together. The motor runs as a cage induction motor.

Answer / maharaja

slip ring induction motor:

1.high starting torque

2.added external resistance

3.two windigs in this motor:

1.stator windig

2.rotor windig

Answer / qwrfc

s dcc

Answer / ramya

dear Thowsif pls clear me about slip ring motor & difference
between the squirel & slip ring ?

Answer / thowsif_emerson_csm team

Igonre the second answer that is for Armature Reaction...

In a 3Ph induction motor(old) 6 wires came out from terminal & not mentioned u1,v1,w1,u2,v2 & w2. how can find out the terminals? how can connect to star delta starter??

1 Answers  

Define settling time.

0 Answers  

How can we calculate the capacitance of generator?

1 Answers  

what is difference b/w CFL and Ordinary lamps? which one is useful for power saving?

5 Answers  

how much mininmum length required to conduct a DC Hipot Test on 33kV AC Cable with 45kV DC? Is it 20meter or Less then 20?

0 Answers   ABB,

If the 11 KV supply is fail. what will happened with it's breaker if it is supplay to the 11KV motor?

3 Answers  

why the generator efficiency is greator than motor?

4 Answers  

What will happen when a DC series motor suppllied by an AC source ?

2 Answers  

According to ohms law voltage proportional to current, then why should current rating is low with high voltage rating in transformer?

5 Answers   KEC,

why there is a high voltage line in multiplication of 11?i.e.- -66kv,11,kv,22kv

4 Answers   Bhel,

In a three phase transformer(delta/star connected)when i touch one end of the bulb in any one phase and other end to earth..will the bulb glow or not..if not why?..i'm touching the bulb in star connected side...

6 Answers  

Why Neutral Isolation is required?

0 Answers