why heat produced at junction of two different conductor.
what care should be taken to minimize it.

Answers were Sorted based on User's Feedback



why heat produced at junction of two different conductor. what care should be taken to minimize it...

Answer / surendr

due to tempreture difference bettween two junction hot&
cold junction

Is This Answer Correct ?    0 Yes 0 No

Post New Answer

More Electrical Engineering Interview Questions

Why don't connect earth wire to elcb?if earth fault occur,how will detect it

1 Answers   TATA, Tata Communications, Telecommunications,


What should be the amps for a MV fuses for transformer 630kVA 20(10)/0.4 kV

0 Answers  


Explain about retrofitting of machine tool.

0 Answers  


Draw a 230kv two-bus bar system showing the following. 1.Two generators (150MW) each connected through one 15.75/230KV transformers 2. 1 outgoing lines 3. Two 230/130 KV transformers 4. BUS PT's 5. CT

0 Answers  


I have a generator of 300kw.400V,50hz . what is means can i assume the load Red Phase with Neutral 300kw.Yellow phase with neutral 300kw and Blue with neutral also 300Kw. or - red with neutral 100kw same as yelloe and blue phase also giving 100kw with neutral respectively

3 Answers  






How to calculate MCB Breaking capacity.

0 Answers  


How can i run three phase bore well motor in 2 phase while i running it by using capacitor its ams increase to 23 ams the distance from motor to stater is 1600 feet

0 Answers   Private,


What is Percentage impedence of a transformer? why it is expressed at a percentage? what is the importance of percentage impedence in case of a transformer?

0 Answers   Haldia,


Does the Impedance of the source affects the THD

1 Answers  


difference between main metering kiosk and check metering kiosk

0 Answers  


What will be the current if the resistance total in a series circuit doubles?

0 Answers  


How select ELCB for 32amp. socket having quantity 12Nos. We have to do this wiring in PLANT. Please Also explain the incoming cable specification.

0 Answers   Gulf Industrial Services Company GISCO,


Categories
  • Civil Engineering Interview Questions Civil Engineering (5085)
  • Mechanical Engineering Interview Questions Mechanical Engineering (4451)
  • Electrical Engineering Interview Questions Electrical Engineering (16632)
  • Electronics Communications Interview Questions Electronics Communications (3918)
  • Chemical Engineering Interview Questions Chemical Engineering (1095)
  • Aeronautical Engineering Interview Questions Aeronautical Engineering (239)
  • Bio Engineering Interview Questions Bio Engineering (96)
  • Metallurgy Interview Questions Metallurgy (361)
  • Industrial Engineering Interview Questions Industrial Engineering (259)
  • Instrumentation Interview Questions Instrumentation (3014)
  • Automobile Engineering Interview Questions Automobile Engineering (332)
  • Mechatronics Engineering Interview Questions Mechatronics Engineering (97)
  • Marine Engineering Interview Questions Marine Engineering (124)
  • Power Plant Engineering Interview Questions Power Plant Engineering (172)
  • Textile Engineering Interview Questions Textile Engineering (575)
  • Production Engineering Interview Questions Production Engineering (25)
  • Satellite Systems Engineering Interview Questions Satellite Systems Engineering (106)
  • Engineering AllOther Interview Questions Engineering AllOther (1379)