when does sedimentation occur
before filteration, along with it, along with chlorination,
after chlorination?
Answers were Sorted based on User's Feedback
Answer / praveen gupta
Sedimentation occurs before filtration.
and the process is
Screening - Areation - Sedimentation - Filtration -
Chlorination
| Is This Answer Correct ? | 10 Yes | 0 No |
Answer / suresh
sedimentation should be done before the filteration because
the voids in the filter bed may get clogged if the filteration is done before the sedimentation.
| Is This Answer Correct ? | 2 Yes | 0 No |
Answer / pooja
sedimentation occur before filteration and by chlorination,
rate of sedimentation increases.
| Is This Answer Correct ? | 1 Yes | 0 No |
Answer / sunil kumar
Sedimentation is a process the treat of water .it occur
before flocatation and then provided the filtration step.
| Is This Answer Correct ? | 1 Yes | 1 No |
Answer / mks
flash mixer - sedimentation - filtration - chlotination -
vaporization
| Is This Answer Correct ? | 0 Yes | 0 No |
Answer / rahul
In water filtration two type of sedimentation used
1. Plain sedimentation
2. Sedimentation aided with coagulation
| Is This Answer Correct ? | 0 Yes | 0 No |
a solid steel rod length 2m dia and 20mm vertically hangs from celling and has a collar firmly atteched to it. above the collar an annular rubber washer of 40mm th. having stifness k = 5n/mm is placed. determine maximum stress in the rod caused by mass of 5 kg falling through a height of 1.2m.
What is the difference between tor steel and tmt steel?
At which temperature in deg Celsius Asphalt is used for the pavement of Roads?
why spacer in reinforcement?
what is diversion?
how to calculate for ramp slop?
How to calculate the weight of sand am 20mm course aggregate in 1 c.m M25 concrete Which use 400 kg of cement ?
Any body please let me know how to prepare Method Statement for Bored Cast in situ piles.
4 Answers Colliers International,
HDPE pipe standard bends using for TSE irrigation? is it possible to use 30 degree?
what is the slump of pile concreting work? give me the value of minimum and maximum value of slump and how give slump in pile?
Plz tell how to find out stell bend correction for all angle of bend and in where it is? Plz answer
pile load testing procedure
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)