working of a diesel generator.
Answers were Sorted based on User's Feedback
Answer / guest
by using a diesel operated motor the mechanical input to
the generator is given and the generator generates the
electricity
Is This Answer Correct ? | 449 Yes | 88 No |
Answer / manoj sharma
A diesel generator is the set of diesel engine and
alternator. Disel engine is prime mover which rotates the
alternator and alternator generates the electricity.
Further diesel engine works on principle of carnot cycle,
air is compressed in a cylender, then it is compressed up
to high pressure, disel is injected to this compressed air
thus cumbustion takes place,this energy force to move the
piston in the cylendrical passage, piston is further
connected to crank shaft. on the other hand generator
wotrks on principle of electo magnetic induction, when a
DC excited rotor is rotated then at synchonous speed EMF
induced in static armature.
Is This Answer Correct ? | 265 Yes | 25 No |
Answer / apurb prakash
Diesel is used as fuel for the generator.disel prodused
mechanical energy with the internal construction of
generator.then this mechanical energy is converted into
electrical energy
Is This Answer Correct ? | 218 Yes | 43 No |
Answer / vijay
genrator is a machine which use diesel as fuel to run the
engine which rotate the rotor of an altenator which produse
the electricity.
Basically genrator is a machine which convert the machnical
energy into electrical energy.
Is This Answer Correct ? | 154 Yes | 28 No |
diesel generator worked as principle of faraday's law of
electromagnetic effect.mechanical energy is converted to
electrical energy.It can stared to d.c supply i.e. 12v ,
24v.D.C supply to starter and after starting it produce
A.C. supply.Engine only use as a prime mover.
Is This Answer Correct ? | 106 Yes | 32 No |
AS PER MY FIELD EXPERIENCE .IN DG SET DIESEL IS USED FOR
FUEL OF STROKE ENGINE,SO THE ENGINE PRODUCED MECHANICAL
ENERGY .THE SHAFT OF ENGINE IS COUPLING WITH GENERATOR
THEREFORE MECHANICAL ENERGY CONVERTED INTO ELECTRICAL
ENERGY .BY USING GOVERNOR WE CAN ADJUST THE SPEED OF THE
ENGINE .&WE CAN DEVELOPING OR CONTROLLING THE DG OUTPUT
VOLTAGE BY USING AVR(AUTOMATIC VOLTAGE REGULATOR).THE
CONTROLLING & DISPLAYING OF GEN SET IS OPERATING BY DC
VOLTAGE FROM BATTERY .WE CAN CHARGE THE BATTERY AT THE TIME
OF ENGINE RUNNING BY USING THE CHARGING ALTERNATOR.ITS
COUPLED WITH ENGINE SHAFT THROUGH BELT .FOR THE SAFE WE
USING STARTER MOTOR TO START ENGINE THATS MOTOR OPERATED BY
DC VOLTAGE .
Is This Answer Correct ? | 73 Yes | 9 No |
Diesel Generator is a set of engine and alternator.
(Which converts mechanical energy in to electrical energy)
here engine is using for rotating the shaft(prim mover or
crank shaft).
Rotation takes place as fallows:
1)The pistons placed in cylinders and these pistons are
connected to Crank shaft through connecting rads
2)By using diesel as a fuel the blasting takes place in
cylinders, this blasting energy can be converted in to
rotation through piston,connecting and crank shaft
3)this rotor speed strength(should be synchronous
speed)depends on firing order of the cylinders (of course on
number of poles on rotor)
4)this shaft is connected to Alternator rotor
5)this rotor contains poles, this rotor will get the D.C
supply from A.V.R through Exciter (RRA: Rotating Rectifier
assembly, it is a converter bridge)
6)So with rotor(poles) rotation the EMF will induce in main
Stator(Faraday's law of electro magnetic effect)
7)A.V.R out put depends on load effect on D.G.
((for further full detail call me at 09458490849)
Is This Answer Correct ? | 53 Yes | 5 No |
Answer / aayush
A diesel generator works on the principal of Faraday's law
of electromagnetic effect. Mechanical power of the rotor is
converted into electrical power. As the rotor rotates
(because of the external voltage given to it through the
battery), EMF and hence current is generated, which is
collected by collectors connected on the stator.
Is This Answer Correct ? | 67 Yes | 22 No |
Answer / v.dhamodharan
generator is a mechanical convert electrical it is a multi
purpose used generator
tower section mainly used generator .
EB power off generator used gen is absent tower is down
Is This Answer Correct ? | 74 Yes | 39 No |
Answer / gagan deep singh
Generator: IT IS A MECHANICAL DEVICE WHICH IS USED FOR
CONVERTING THE CHEMICAL ENERGY STORED IN FUEL TO THE
ELECTRICAL ENERGY. IT CONSISTS OF FOLLOWING COMPONENTS
1.DIESEL ENGINE
2.TURBINE
3.ALTERNATOR
4.COIL WITH PRIMARY $ SECONDARY WINDING OF COPPER WIRE.
1.DISEL ENGINE CONVERTS CHEMICAL ENERGY INTO MECHANICAL
WORK.
2.TURBINE CONNECTED WITH CRANSKHAFT OF ENGINE ROTATES
IN THE CORE(STATOR.
3.ALTERNETOR CONVERTS MECHANICAL ENERGY INTO ELECTRICAL
ENERGY.
4.WINDINGS ARE USED TO STEP UP OR STEP DOWN THE VOLTAGE.
Is This Answer Correct ? | 57 Yes | 23 No |
How many types of Differential protection are there? and what the special arrangement are made at the time of charging of a transformer on the Differential protection?
if its possible for step up or step down DC volage directly ? possible means how we can do it ?
explain about RTCC
Don't you have similar question banks related to Oral Certification Examination conducted by Mercantile Marine Departments / Directorate of Shipping, Ministry of Shipping for Electro Technical Officer?
0 Answers Bernhard Schulte Shipmanagement,
what is the relation between reactive power and power factor for the what is the limit of reactive power and power factor
what is vA rating and class of a ct.
Why screen of the screened cable not earthed on both the ends of cable
during the period of armature reaction ,if the brush shift is not accomplish, what happen?
how to find out speed of single phase motor
why the Parameters : Base Voltage & Maximum Voltage can't be equal in value in a VFD (Variable Frequency Drive) ? How much the base voltage would be lower than the maximum voltage ? If 400 V is the 3 phase output of a VFD ... then what should be the base voltage ? thanks a lot
why does the magnetic balance tests at transformers? how to provide earthing in flight?
what about the power of wattmeter at starting and loding?