A 7 storey building has a floor area of 35,000sq.ft on each
storey. On the ground floor 11KV electrical sub-station is
to be erected. A load of 3kw for every 400sq.ft (p.f is
0.8) is proposed for each floor. fire pump 7.5hp, water
pump 5hp, lift 2 nos, each 10hp and 20shop load of each
shop is 5kw. calculate
a. load each floor
b. total load of building
c. L.T feeders for aech floor and from transformer to
main.
d. distribution diagram
e. capacity of sub-station/capacitor bank
f. line diagram
No Answer is Posted For this Question
Be the First to Post Answer
what power factor should we maintain to get maximum benefits our organisation load is 10 MW? is it best to maintain the PF at .96 rather than Unity to save electricity bill?
Does power factor vary with speed?If yes, how?If not, why?
What are the precautions to be taken before working on a cable?
some practicle study shows that the reactive power at the receiving end is not equal to the reactive power at the sending end.But according to theory the reactive power is exchanged by different parts of the network – capacitors and reactors permanently, but is never consumed or produced. Then Where that reacrtive power loss occuring?is there any formula to calculate reactive power loss?
In a dc series motor increases in lord current results in
Hoe to calculate body earthing conductor size ?
What is the function of induction motor when low voltage is apply.
How to measure corona loss in a transmission line?(Plz ans only if u know the exact answer)
How can calculate the earthing strip of Copper/GI for rating of 30kV,discharge current 10KA Lightning arrester.
How to calculate capacitor bank size at a load 800kVA.
Why the transformers are rated in KVA. ? in new view.
The DC current waveform is - . What about the fire alarm waveform?