Answer / ramprasad thorat

as the copper loss depends on current and core loss depend
on voltage so it is easily possible to find the efficiency
of the alternator. also at the time of manufactoring we dont
know the power factor of the load. so the alternators rating
is in VA.

Answer / nitin

as the load (i.e. resistive /inductive / capacitive )on the
alternator / transformer is not defind so that the
laternator / transformer rating in kva.

kw= sqrt3*v*i*cosQ

resistive p.f=0,
inductive p.f=lagging
apacitive p.f.=leading

We have received supplies of the ordered material. payments against the supplies also released. Where ST paid 4% against form C. Meanwhile it has been observed that 25% of material supplied was defective. Please suggest whether the issuance of C form from our side would be stopped till settlement of liabilities.

0 Answers  

---

what is power factor

3 Answers  

---

What products have you designed which have entered high volume production?

0 Answers   Intel,

---

why mostly conductor made by 7 nos wire?

1 Answers  

---

Can we see the poles in the motor?. if yes then how can we see plz tel me

2 Answers   MRF,

---

---

Dear Friends, I have a 500KVA transformer supplying whole factory having 3 phase and single phase mixed loads. Power room has ammeters connected via CTs for individual phase. Now I know that readings shown on meter for each phase say R,Y and B are line currents. But when I want to know the total on transformer do I need to add the currents of all three phases readings shown on meter or value for anyone phase will give me the correct power load on transformer for that point of time. 2. If ammeter shows unbalanced readings for R,Y, B phases say 150, 250 and 300 respectively so can I assume that 150A i.e average of 3 will be the 3phase load currents and remaining will be 1phase currents. Please clarify my doubt.

4 Answers  

---

Why corona leads to production of Ozone and glow of the color VOILET?

0 Answers  

---

what is AH of battery

6 Answers   NSIC,

---

Can we use a window type neutral CT instead of a bar type neutral CT. We have an issue with a neutral bar type CT of 800/1 ratio with a Circuit breaker NS800L shneider type, and we want to change it with a window type. Pls advise. Thanks

1 Answers  

---

Can We Apply DC POWER To Transformer???? And Why????

4 Answers  

---

What is the basis for framing the rules of block diagram reduction technique?

0 Answers  

---

What are the types of excitation system?

0 Answers  

---