-
Civil Engineering (5085) - Mechanical Engineering (4451)
- Electrical Engineering (16632)
- Electronics Communications (3918)
- Chemical Engineering (1095)
- Aeronautical Engineering (239)
- Bio Engineering (96)
- Metallurgy (361)
- Industrial Engineering (259)
- Instrumentation (3014)
- Automobile Engineering (332)
- Mechatronics Engineering (97)
- Marine Engineering (124)
- Power Plant Engineering (172)
- Textile Engineering (575)
- Production Engineering (25)
- Satellite Systems Engineering (106)
- Engineering AllOther (1379)
what will happen if petrol is fed to diesel engine and disel is fed to petrol engine?in any case engine will run or not?
8 21162i cleared the written xam. for the post of atc now what i am going to prepare for the interview plz.guide me i dnt wanna loose this organisation bcoz its my dream company
1421i cleared the written xam. for the post of atc now what i am going to prepare for the interview plz.guide me i dnt wanna loose this organisation bcoz its my dream company
1704why in India it is maintained for exactly 50HZ frequency, why it is not that 49Hz,why it is so?
2 4271can i know how to design overcurrent setting and earth fault for 11kv & o.433kv system assuming tx 1000kva.
2 5098
HOW MUCH HARDNESS OF CAST IRON?
Can rice husk ash be used instead of coal fly ash for manufacture of clc/ foam concrete
In our plant we have installed new MCC with ELR and CBCT which is detecting some leakage current in the system but it leading to some confusion when to check that in which feeder which is drawing current we put off the whole panel itself but still CBCT detecting some leakage current so can anybody ans me , where i am going wrong or how to detect whether its actual leakage or CBCT malfunctioning.
What is loop1 and loop2 in MTS LT?
difference between transient & Steady state response?
33kv substation lay out details & line to line & line to earth measurements
What are the defects in exhaust valve?
Describe the test procedure to determine the vector group
How do apply electrical 'c'license......pls advice
Hi l, I want to install a water purifier (UV) at my home. the distance of water purifier from water tank [1000 lt ] is 7 ft. Is it sufficient for electrical water purifier? I want to know what is the water pressure from 1000 lt tank (the pipe used from water tank to machine is of inch 1-1/4") please note minimum water pressure is required for UV is - Water Pressure Min: 0.4 kg/sq. cm.Max: 2.0 kg/sq. cm. Please advise me on the following: 1) What is the water pressure generate in above condition. 2) What is the required height from the UV machine to water tank for the above condition? Thanks is advance.
what is formula to cal cute earth pit numbers and size of earth strip used in earthing?
Will a steel cable become longer if it is heated while under load? Explain
Explain what are the affinity laws associated with dynamics pumps?
i want to know about torque of slip ring induction motor
Why wheel type steerig is used in cars instead of hand steering used in auto-rickshaw?
