Answer / b krishna srihari

read objective type by ramprasad and aptitude by b s
agarwal and if u have time read all chemical engineering
standard books

Answer / sunilkumar valvi

yes

Tell us about a time when you failed to meet a deadline. What were the repercussions?

4 Answers   Bhavani Engineering Works, Caltex, Emirates, Holiday Inn, Regent, United States Seafoods,

---

I am writing the chemical engineering subject test for Reliance India Limited. Could someone who has taken the test please list some of the questions from that paper?

2 Answers  

---

Dear sir/madam I am in final year BE chemical engineering.Which companies i can apply .Please guide me.It is very helpful for me

0 Answers   TCS,

---

what is the differance between Horizental and vertical heat exchanger?

11 Answers   Bihar Caustic and Chemicals,

---

Question 49 - According to rules of thumb in chemical process design, consider the use of an expander for reducing the pressure of a gas when more than 20 horsepowers can be recovered. The theoretical adiabatic horsepower (THp) for expanding a gas could be estimated from the equation : THp = Q [ Ti / (8130a) ] [ 1 - (Po / Pi) ^ a ] where 3 ^ 3 is 3 power 3 or 27, Q is volumetric flowrate in standard cubic feet per minute, Ti is inlet temperature in degree Rankine, a = (k - 1) / k where k = Cp / Cv, Po and Pi are reference and systemic pressures respectively. (a) Assume Cp / Cv = 1.4, Po = 14.7 psia, (temperature in degree Rankine) = [ (temperature in degree Celsius) + 273.15 ] (9 / 5), nitrogen gas at Pi = 90 psia and 25 degree Celsius flowing at Q = 230 standard cubic feet per minute is to be vented to the atmosphere. According to rules of thumb, should an expander or a valve be used? (b) Find the outlet temperature To by using the equation To = Ti (Po / Pi) ^ a.

1 Answers  

---

POLYMER ENGINEERING - QUESTION 24.2 : Let C% be the fractional crystallinity, Rs = density of sample, Ra = density of amorphous form and Rc = density of crystalline form. In a polymer, these unknowns could be related by the equation C% = (Rc / Rs) (Rs - Ra) / (Rc - Ra). (a) Find the equation of Rc as a function of C%, Rs and Ra. (b) Two samples of a polymer, C and D exist. For sample C, C% = 0.513 when Rs = 2.215 unit. For sample D, C% = 0.742 when Rs = 2.144 unit. Both samples C and D have the same values of Ra and Rc. Find the values of Ra and Rc in 6 decimal places.

1 Answers  

---

how will we calculate the heat of formation through electron...??

0 Answers   BARC,

---

On what basis are materials to be crushed evaluated apart from size?

0 Answers  

---

CHEMICAL FLUID MECHANIC - EXAMPLE 3.3 : The drag coefficient Cd = 0.05 and lift coefficient Cl = 0.4 for a levelled flow aircraft are measured. The velocity of the aircraft is v = 150 ft / s with its weight W = 2677.5 pound-force. (a) Find the value of the lift of the aircraft, L, when it is also its weight. (b) The drag of the aircraft, D = Cd M, L = Cl M. Find the value of D. (c) The power required is P = Dv. If 1 pound-force x (ft / s) = 1.356 W, find the value of P in the unit of Watt or W.

1 Answers  

---

SSR meanig

1 Answers  

---

1.How a chlorine leak is detected? 2.What would happen if excess chlorine is added to water in cooling tower?

3 Answers  

---

What could be a possible cause for sudden foaming in a cooling tower?

0 Answers  

---