Answer / thowsif_emerson_csm team

The windings on the rotor of a squirrel cage motor is
comprised of aluminum (or sometimes copper) bars embedded
in the steel laminations of the rotor. The ends of the
rotor bars are shorted together by rings at each end of the
rotor. There is no external electrical connection to the
rotor. The bar and ring structure looks like an exercise
wheel for a pet squirrel.

The rotor of a slip-ring motor is wound with wire coils.
The ends of the windings are connected to slip rings so
that resistors or other circuitry can be inserted in series
with the rotor coils through carbon brushes that slide on
the slip-rings allowing an electrical connection with the
rotating coils.

Answer / amirtha

in squirrel cage motors rotor will be shortcircuited, so we
cannot introduce any external resistance... where as in
slip ring we can introduce external resistance..

Answer / ch.madhu

in squirrel cage motors rotor will be shortcircuited, so we
cannot introduce any external resistance... where as in
slip ring we can introduce external resistance..so we csn
get high starting torque in slipring ind. motor.

Answer / percy

SQL ROTOR
-Al bar r dere which are sht ckt with end rings
-low starting torque
-skewed to ristrict cogging
-electrically independent

slip ring rotor
-3 phase winding r dere
-high starting torque
-slip rings are present

Answer / kishor kumar

Sql cage
- Not having rotar wdg
- low Starting Torgue
- can Not add external resistance
- Not having Slip ring brush
- self starting
Slip ring
- Having ritar wdg
- High Starting Torque
- Add some external Resistance
- Having Slip ring brush
- easy starting

Answer / sharath2529

Squirrel cage induction motor:-
- Not having rotor winding
- low Starting Torgue
- can Not add external resistance
- Not having Slip ring brush
- self starting
Slip ring
- Having rotor winding
- High Starting Torque
- Add some external Resistance
- Having Slip ring brush
- easy starting

Answer / r.boopathi raja

Slipring:
1. Having a Rotor winding
2. Need a starter to start
3. High starting torque
4. It's Have a slipring and brush to get a rotor power
5. Maintenance is high

Squirel cage I/M:
1. Rotors are having short circuited copper bars
2. Self starting one(Need not having a starter)
3. Low starting torque
4. There is no slipring and brush
5. Maintenance is low

Answer / anand

the starting current of a slip ring induction motor can be
controlled easily by the use resistance tapping but in
squirrel cage induction motor the starting current can'nt
be contolled so the speed.

Answer / bimal sarkar

1. Almost 90 per cent motor used in industry is squirrel-
cage motor. It is low price and low maintenance cost.
Slip-ring motor opposite of squirrel-cage motor.
2. Squirrel-cage rotor consists of cylindrical laminated
core with parallel slots. There are no wire winding but
consists of heavy bars of copper, aluminum or alloys and
all slots are short by End-ring.
Slip-ring rotor consisting with 3-phase, double-layer
winding of copper coils and it’s short by slip-ring through
external resistance.
3. It is not possible to add any external resistance in
series with the rotor circuit.
There is used an external resistance in series with the
rotor circuit by carbon brushes which is mounted on slip-
ring.
4. It’s stator circuit can be change by star or delta with
suitable requirement.
It’s stator circuit internally short by star connection.
Not possible to change in delta connection.
5. Squirrel-cage motor speed cannot control, If we are not
connected any variable drives.
Slip-ring motor speed can control by it’s external
resistance which is connected in series with rotor winding.
6. The starting torque per ampere is very low and goes to
full-load torque it have 1.5 times although the starting
current is 5 to 7 times the full-load current . The motor
has not useful to start against heavy loads.
Increases the rotor impedance due to addition of external
resistance and so reduce the rotor current. Starting torque
is increased but after a certain point, the effect of
increased impedance predominates the effect of improved
power factor and the torque starts decreasing.

Answer / dhananjai d.k

squirrel cage rotor is simply a cage structure i.e copper
or aluminum bars short circuited at each end by which
providing a close path to induced current. In squirrel cage
rotor no starting current can be added so the starting
current is generally very high 5 to 6 time of rated full
load current and it has high starting torque. Squirrel cage
rotor is not designed for any number of pole in it
automatically number of pole equivalent to stator get developed.
While wound or slip ring induction motor is
simply a copper 3 phase winding wound for equivalent number
of pole as that of stator and all the winding are short
circuited through a slip ring . In slip ring type motor
external resistance can be added and thereby starting
current can be reduced, Generally slip ring induction motor
is used as adjustable speed drive bcoz its operating
characteristic can be modified according to our need.

difference between isolater and circuit breaker?

7 Answers   Adani,

RATING OF LIGHTENING ARRESTER FOR 11 KV LINE IS 9 KV is ok ,but haw to calculate the KA rating?

0 Answers  

What is slip in an induction motor?

0 Answers  

do we need NGR panel when the output of the genset is LV but after that it is step up to 22 kv. condition is 12 genset 400v are operating in parallel.

1 Answers  

Draw a 230kv two-bus bar system showing the following. 1.Two generators (150MW) each connected through one 15.75/230KV transformers 2. 1 outgoing lines 3. Two 230/130 KV transformers 4. BUS PT's 5. CT

0 Answers  

how much speed will trawiling current

3 Answers   TCS,

There is two transformers of 2MVA & 3MVA, which transformer is located at the sending end & which is at receiving end. why?

3 Answers  

can we use the 110 v primary Tr 240 v secondary step up Transformer as reverse 240 pri 110 sec

3 Answers   Hyundai,

what is the resistence of human body?

3 Answers   BBC, NTPC,

what is transient voltage?

0 Answers  

which cable is preferred PVC OR XLPE for voltage from 220V to 11 KV with proper justification

1 Answers   BARC, Sail,

why generator and t/f ratings given in kva & motor rating is in KW?

6 Answers