can any one explain in which term we are flow flow is it volumetric r is it mass? and y

0 Answers  

---

I need to know steps to Calibration Valve Guard......

0 Answers  

---

what is IEC code in cables & how to selecting cables?

0 Answers   ROS,

---

when i installed Allen_bradley_RsLogix_500_Pro_V_7.0,after installation it gives the fatal error.it need activation file.from where and how i can find its activation file.

6 Answers  

---

why we use impulse line of flow transmitter at 45 deg. angle both side of orifice plate.

0 Answers  

---

---

what is the calibration procedure for transweigh make weigh feeder?

0 Answers   Anjani Cements,

---

What is the use of control cable?

0 Answers  

---

i have level transmitter -400 to 0 range for steam drum application but i am unable to calibrate if installation of lt below lower tap what will be the effect ? and as per std wht is location of lt ,above lower tapping or below

1 Answers  

---

Why the industry's standard current standards are from 4mA to 20mA,not from 0mA or any other range?

3 Answers  

---

a pressure transmitter with a range of 0 to 2500kpag has a specified accuracy of 0.5 % of span.It is to be calibrated using a comparison gauge to have an accuracy of 0.1% of span.The comparison gauge has a range of 0 to 3000kpag What is the accuracy ratio? is this ratio acceptable?

1 Answers  

---

what is three element loop

7 Answers  

---

why we use negative 24vdc to a proximeter

4 Answers   KNPC,

---