Which motor has high Starting Torque and Staring current
DC motor, Induction motor or Synchronous motor?
Answers were Sorted based on User's Feedback
Answer / khursid allam khan
DC series motor has high starting torque..but it is not that
we cant start it without load,it is that we dont start it
without load beacuse its high speed will severly damage the
motor and may harm its sorrounding by breaking the parts..it
is very high speed..thats why it is used in traction where
high load is given to it
Is This Answer Correct ? | 43 Yes | 5 No |
Answer / dipak roy
It seems from the information available in the intenet that I have invented AC 3-phase squirrel cage Induction motor which has highest Starting Torque at its rated capacity, which may be from less than 1 KW to more than 1000 Kw. A prototype motor 1450 rpm of 7.5 Kw rated capacity has been tested on Test Bench to find that when such a motor is tested with Load Vs Speed graph produces 6.1 Kg.Mtr torque at 1200 rpm or 20% slip and average phase curren being 9.2 amp.,Under Locked Rotor Condition, 0 rpm, torque developed being 3.8 Kg.mtr, the average phase curren was 30.1 amp. But when the prototype motor was tested on the bench under Locked Rotor Condition (LRC) it produced torque of 7.3 Kg.mtr, average phase current being 27.8 amp. and at 1200 rpm it produced 3.1 Kg.mtr torque with average phase current of 9.4 amp. So AC 3-phase squirrel cage induction motor can very well be started with full load along with reduced Stator current or electrical consumption by about 8%. The prptotype was made and was being tested for development of 1000 hp traction motor for the locomotives of the Indian Railways
Is This Answer Correct ? | 0 Yes | 2 No |
Define open loop control system.
1. what is exciting winding, rotor winding, startor winding. and how it works? in ac generator
4-Why we measure the insulation resistance of main core and frame in spite of that must be connected with ground before energize the transformer?
why transformer fuse wire is very thin as compared to home fuse wire while voltage lavel is low
how to calculate efficiency of voltage and current controlled welding transformer?
Why machines are avoided to work is saturation region of B- H curve?
how does bode plot have an advantage over root locus? how does it determine the stability of a system depending upon the location of poles and zeroes?
What is the mmf,rgt and ngt please brief completely
ther is any difference if we use 240 V A.C,50 Hz,1 Ph. in place of 230 V A.C,50 Hz,1 Ph.
sometime battery charged and then automatically charged when rectifier ON conition, is there any chances please clarify the same.
How to calculate the copper in HT motors if KW, RPM & Voltage is given
0 Answers Control Dynamics, NTPC,
define ac reactor? thier application;