Answer / m.kumaran.

the types of insulators are
1.Pin type insulator.
2.Disc type insulators.
3.string type insulators.
4.shackle type insulators.

Answer / sayanoo.com

The types of insulators for overhead lines are:
Pin Type
Suspension Type
Shackle type
For mounting of busbars in frame you can either use
insulators made of porcelein or cast resin.

Answer / khaled suleiman

there are many types of insulators which used according to
design :
- tension insulator
-suspension insulator
-Horizontal Post insulator
-Vertical Post Insulator
- Pin Insulator
for using composite insulator both tension and suspension
are of long rod type insulator , only the difference in
insulator fittings rel;ated to conductor.
when use ceramic disc insulators which is pin & cap type it
can use also for tension and suspension wioth suitable
fittings.
post insulators usually used to medium voltage 11kv - 33kv
pin is suitable for low voltage.

horizontal are used as armless whic suitable when corridor
issue is raised.
of course there is other type of insulators for covered
insulated conductor

Answer / selvakumar.k

Pin,suspension,shackle,string

Answer / renyrjn

wat about epoxy insulators used in copper
earthing..anybody?????????

How to decide whether A / B / C / D curve type MCB should be used?

0 Answers  

Why star pointed terminal have no current? how?

3 Answers  

if single phase is 230 v three phase is 440 v then what about two phase?and why is it so?

2 Answers   Eicher,

what is the effect of PF on alternator sizing?

2 Answers   Siemens,

what is relation between motor poles & motor current in 3 phase motor

1 Answers  

How many gap between finger contact in a.c.b. and v.cb.?

0 Answers  

Why we use duplex coil and hook switch in telephone system?

0 Answers  

if sf6 gas low in gis what will happen

0 Answers  

What type of bulb used in small size cross symbol boder and original flame type(Deepam)?

1 Answers  

What will be the effect of in HT XLPE 220 KV cable when one side of the Armour/cable ends are not grounded. Will there is difference between 3-phase voltages? like: if A. Both End of Cable grounded Phase Voltages:- V1=219 KV, v2=220 Kv, v3=220 KV. B. One End is grounded other is not: than Impact on Phase Voltages:- V1= KV, v2= Kv, v3= KV. Remain same or unchanged??

3 Answers   Jamshoro,

How much ph is maintained of water electrolyte which is used in LRS for 1200 kw slipring induction motor ?

0 Answers   AMS, JK Lakshmi Cement,

How can we Run three phase motor when only single or two phase supply is available ??

3 Answers