different between highvoltage & lowvoltage source
Answers were Sorted based on User's Feedback
Answer / soumendasbiswas
British Standard BS 7671:2008 defines low voltage as
50–1000 V AC or 120–1500 V ripple-free DC between conductors;
50–600 V AC or 120–900 V ripple-free DC between conductors
and Earth.
The International Electrotechnical Commission and its
national counterparts (IET, IEEE, VDE, etc.) define high
voltage circuits as those with more than 1000 V for
alternating current and at least 1500 V for direct current.
| Is This Answer Correct ? | 8 Yes | 0 No |
Answer / pawan dahiya
1. 11kv to up high voltage
2. 440 to down low voltage
3. high voltage maintenance difcal
4. low voltage maintenance esay
| Is This Answer Correct ? | 1 Yes | 1 No |
Answer / engr mohamed abd el-raouf
medium voltage is 11 kv 6.6 kv 3.3 kv
high voltage 33 kv 66 kv and higher
| Is This Answer Correct ? | 0 Yes | 0 No |
Answer / elangkumanan
150KW-500KW LOW VOLTAGE
500KW TO 11KV VOLTAGE TO HIGH VOLTAGE THAT IS DIFFERENT
| Is This Answer Correct ? | 0 Yes | 2 No |
Answer / ram51288
upto 6.6kv high voltage above 6.6kv highvoltage
| Is This Answer Correct ? | 2 Yes | 9 No |
Please provided formula for calculate the cable size from step up transformer to M.V panel, run overhead aluminum cables, total load is 5mega watt, total length 900 feet.
what r the types of detectors? state the location these detectors?
Hot Water System (HWS). Will a 30ma elcb have more nuisance tripping than 100ma elcb
How the speed of synchronous motor changes with the variation of load?
The reason why the sending end and receiving end voltage sare almost equal when capacitive load is added.
Why in metering Ct for ammeters ct secondary side is grounded for each Ct but not in case of CBCT (Core balance current transformer)..kindly some1 highlights the reason..is it because net flux is zero?
During Millivolt drop test current leads are applied in the extreme ends and voltage leads are given just before the current leads.. what will be the difference if voltage leads are given in the extreme ends? and why?
What are the necessary solutions needed to be carried out on a malfunctioned earthing mechanism of a VACUUM CIRCUIT BREAKER.(TAMCO)
what is the function of capacitor duty contactor in an capacitor panel???
What is the Harmonics??????????
What are the basic component of a cro?
briefly explain the main blocks found in a microprocessor based system
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)