which types of tests are required after commissioning of
6.6 kva tranformer?

Answers were Sorted based on User's Feedback



which types of tests are required after commissioning of 6.6 kva tranformer?..

Answer / m k

after commissioning breakdown voltage test of oil and dissolve gas analysis of oil should be performed periodically.

Is This Answer Correct ?    0 Yes 0 No

which types of tests are required after commissioning of 6.6 kva tranformer?..

Answer / suresh

to check the oil temp indicator, winding temp indicator,
check the oil level in conservator

Is This Answer Correct ?    0 Yes 2 No

which types of tests are required after commissioning of 6.6 kva tranformer?..

Answer / kashifhabib

I think all the test are performed before commissioning.

Is This Answer Correct ?    1 Yes 7 No

Post New Answer

More Electrical Engineering Interview Questions

i have faced a problem in ro plant grunfos make bm30type pump it is 22kw pump. We start this pump using siemens 3rw 4423-ibc44, 30kw softstarter but this soft starter will frequently failier so we planed to change dol starter. So pls tell anybudy its possible or not.

0 Answers  


How much UG cable size should i use so as to accomodate a ground + 2floors house. A 1.5ton AC & geysers(2) in each floor with lightings

2 Answers  


why some transformer without breather.

1 Answers   GTS,


Classify driling machines.

0 Answers   Essar,


what will happen reduce the transformer voltage from 415v to 406v, is it save the energy,? are this methodis good to reduce the energy.?

0 Answers  






generally in LT and MV motors we are using 3.5Coresx16,25,35,50 etc cable for supply.although motors is earthed at two point and having all protection.then why we are using that 1/2 core for earthing the motors.while in HT cable we are using only 3core cable for motor supply.generally lt and mv motors are delta connected and ht motors having star connection.whethere it is having any relation with winding connection( star or delta).all motors i am talking about are dol only.can anybody solve my confusion.thanks...

0 Answers  


What is the difference between tie bus and bus coupler?

1 Answers  


what do w do when the output of generator is fluctuating?

0 Answers  


hello if any one have papers vof hpcl or sail, plz send me

0 Answers  


Difference between SHORT CIRCUIT and an OVERLOAD ?

1 Answers  


after how many spot we must chang secondry cable in portable spot welding gun?

0 Answers  


y r manufacturing fan is running into clockwise direction?y they can made in anticlock direction?pls give rply/ venkat.gattupalli@gmail.com pls send to my mail....

1 Answers  


Categories
  • Civil Engineering Interview Questions Civil Engineering (5084)
  • Mechanical Engineering Interview Questions Mechanical Engineering (4451)
  • Electrical Engineering Interview Questions Electrical Engineering (16631)
  • Electronics Communications Interview Questions Electronics Communications (3918)
  • Chemical Engineering Interview Questions Chemical Engineering (1094)
  • Aeronautical Engineering Interview Questions Aeronautical Engineering (239)
  • Bio Engineering Interview Questions Bio Engineering (96)
  • Metallurgy Interview Questions Metallurgy (361)
  • Industrial Engineering Interview Questions Industrial Engineering (259)
  • Instrumentation Interview Questions Instrumentation (3014)
  • Automobile Engineering Interview Questions Automobile Engineering (332)
  • Mechatronics Engineering Interview Questions Mechatronics Engineering (97)
  • Marine Engineering Interview Questions Marine Engineering (124)
  • Power Plant Engineering Interview Questions Power Plant Engineering (172)
  • Textile Engineering Interview Questions Textile Engineering (575)
  • Production Engineering Interview Questions Production Engineering (25)
  • Satellite Systems Engineering Interview Questions Satellite Systems Engineering (106)
  • Engineering AllOther Interview Questions Engineering AllOther (1379)