Answer / pankaj kumar gupta

KW=COS($)*KVA

WHERE $=PHAI

Answer / vinod sharma

IN ANY POWER SYSTEM WE SEE THAT SOME WORDS LIKE KW, KVA,
KVAR, KVAH ARE USED. THERE IS A RELATION IN BETWEEN THEM.
WHEN WE USE KW IT MEANS IT IS THE COMBINATION OF
1.732*V*I*COS(ANGLE BETWEEN VOLTAGE AND CURRENT). BUT WHEN
WE USE KV,IT IS ONLY VOLTS IN KILO.

Answer / tauseef tarique, engineer(e)

kV (Kilo Watt) is the unit of measurement of electrical
power. While kV is the unit of measurement of voltage
(potential difference).
for the three phase supply
kW= 1.732xVxIxcos phi
where V= Voltage
I= Current
Cos phi= power factor

For single phase supply
kW= VxIx cos phi

Answer / sivananda samantara

kw=kilo watt the measurement of power
kv=kilovolt the measurement of voltage
so normally kw=1.732*v*i*pf
it is the relation between each

Answer / ziyados

W = 1.73 I V p.f for TP
KW = 1000 W , KV = 1000 V so:

KW = 1.73 I KV p.f

Answer / qasim

basically we can calculate watt by
watt= (volts required)(Amperes)(Power Factor)
watt=V*I*P.F
and then for getting the kilowatt, divide the resulted answer by 1000 so by this method we can calculate correct relationship b/w Kw and Kv.

Answer / g.v.suresh kumar

KW=KV*I*P.F

Answer / majid shaikh

KW=Measurement of Power (Real Power) Converted to motion,heat
KV=Measurement of Volts

Answer / bambhaniya sanjjay

149 kw to ans to kv

Answer / student

It is simple as relation between family(w) & grand father
(v).
kw is the product of v,i,cos phi,
kv is the pressure which makes the power.

we have 400kv/6.6kv transformer ,it has total 9 taps on HV side with normal tap on tap no 5.when we took the ratio test we observed that ratio was decreasing from tap 1 to tap 5 and was found increasing from tap 5 to tap 9.What is the reason?if anyone have related document then please send me on the email id ankushbahale@gmail.com......plz plz

1 Answers  

what is meant by transformer oil temparature

3 Answers   Vijaya Bank,

what convarts RRA in alternator ,AC to DC or DC to AC,

1 Answers   Birla,

The maximum demand of consumer is 2 kW and his daily energy consumption is 20 units. Its Load Factor is (1) 10.15% (2) 41.6 % (3) 50 % (4) 60%

2 Answers  

What is Lockout Relay and what is use of it in electrical installation

1 Answers  

which type of capacitors using in single phase motors

1 Answers   Vishnu Infra,

How to improve insulation resistance of Motor

2 Answers  

What is reason to get a power factor nearly zero in resistive loads

2 Answers  

what are effects of harmonics in the three phase a.c power system ?

2 Answers   AIIMS,

How we do the maintenance of Servo motor, even we cant open it?

0 Answers   ITC Infotech,

Why dont we get shock while testing for voltage with a line tester? How the bulb inside the tester glows while testing with tester coz we are totaly isolated from earth or we are not giving close path for the current to flow?

3 Answers  

what is meant by motor startup supervision & motor load jam protection ?

0 Answers   ABB,