why, when birds sit on transmission lines or current wires
doesn't get shock?

Answers were Sorted based on User's Feedback



why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / senthil kumar.a

TO MARIS
THANKS FOR UR RESPONSE

Is This Answer Correct ?    4 Yes 4 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / alwingp

As the Bird is not touched on other lines or earth, the
circuit is not closed through the bird. Current flows only
through a closed circuit, So in this case current does not
flow through bird and so it will not get electric shock.

Is This Answer Correct ?    1 Yes 1 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / terry

the reason birds dont get a shock when they touch an
electrical wire is this electricy always trys to find the
easy route to anywhere now it dosnt go through the bird
because it is easier to go through the wire than the brid
it has nothing to do with the birds being on nutral wire
what ever wire the bird is on it wont get shocked and that
is the sane for us we wont get shocked as long as were only
touching one wire and not touching anything else conected
to the ground

Is This Answer Correct ?    1 Yes 1 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / mayer

beau current flow path is closed circuit only.if it had
touch on a single line ,current must not glow on it's
body.if it will touch any two line including neutral also
it shell be burn duen to current flow.

Is This Answer Correct ?    2 Yes 2 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / k.abdul basith

normally current is the flow of electrons,which flows in
closed circuit.practically current flow if there is any
potential difference.if a bird sit on a line, it wont touch
the ground and hence the circuit is not closed.hence crow
wont feel shock.same is true for a human too.if we touch the
phase line when we are in air the circuit is not closed and
hence we wont feel any shock unless we touch the ground
while touching the phase wire....

Is This Answer Correct ?    0 Yes 0 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / medo

to Senthil Kumar
your answer is the best answer

Is This Answer Correct ?    0 Yes 0 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / varun

when birds sits on the transmission line which is like
11/33/66/110/220/310kv(kilovolts)coming from substations at
the time when birds sit ,line man calls operator in
substation through his free govt mobile phone and asks
operator to switch off the power, thats the n human heart
,let human die but in as told in text books birds shouldnt
die ,keeping the rule alive....

Is This Answer Correct ?    0 Yes 0 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / shahzad

it is clear that current flows in closed circuit.so when
birds sit on the line or neutral it doesnt complete a path
so there is no shock,similarly when this bird have one leg
on one line and send is on other line than it will have
shock.we the humaan being will get shock when the we keep
one wire in one hand and stand on the earth or floor it is
for ur information that earth is zero potional so we get
shock

Is This Answer Correct ?    0 Yes 0 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / akash

Because the the current flowing inside the wire

Is This Answer Correct ?    0 Yes 0 No

why, when birds sit on transmission lines or current wires doesn't get shock?..

Answer / sireesha

It is the potential difference which causes the current but not the potential..so if the bird sits on a phase line doesn't get shock since there is only potential.But if the bird touches both the phase line and neutral( generally earth) then it gets shock due to potential difference between phase and neutral.

Is This Answer Correct ?    0 Yes 0 No

Post New Answer

More Electrical Engineering Interview Questions

how fault in an electric system is detected & hw protection of equipments is done ?

6 Answers   NTPC, RLY,


why the generator will take 8 to 12 hours to start after it got interrupted due to technical problems in case of power plants.

1 Answers   NTPC,


Wat is da difference b/w neutral earthing and unearthed system?

2 Answers  


What happens when the power factor is leading and its disadvantages.

1 Answers  


difference between earthing and grounding?

2 Answers   ABB, Bharti, L&T,






How does a system control centre in a utility plant gets the grid frequency of the electrical network (50 Hz or 60 Hz)by the SCADA system?

1 Answers  


why is a power transformer used only occasionally?it is used to step up at generating stations?and that needs to be done all day long !!!!!!!

0 Answers  


highest rating of alternator used in india

1 Answers  


What is the Diference between DYN 11 and DYN 5 .How to change the Vector group from DYN 11 to DYN 5.

3 Answers  


A 100W electric lamp is supplied from a 115V, 60HZ source. The peak instantaneous power dissipated in the lamp filament is

0 Answers  


In motors how many types of cooling systems were used?

0 Answers   NTPC,


what are the difference between protection class CT and Class PS CT

13 Answers  


Categories
  • Civil Engineering Interview Questions Civil Engineering (5085)
  • Mechanical Engineering Interview Questions Mechanical Engineering (4451)
  • Electrical Engineering Interview Questions Electrical Engineering (16632)
  • Electronics Communications Interview Questions Electronics Communications (3918)
  • Chemical Engineering Interview Questions Chemical Engineering (1095)
  • Aeronautical Engineering Interview Questions Aeronautical Engineering (239)
  • Bio Engineering Interview Questions Bio Engineering (96)
  • Metallurgy Interview Questions Metallurgy (361)
  • Industrial Engineering Interview Questions Industrial Engineering (259)
  • Instrumentation Interview Questions Instrumentation (3014)
  • Automobile Engineering Interview Questions Automobile Engineering (332)
  • Mechatronics Engineering Interview Questions Mechatronics Engineering (97)
  • Marine Engineering Interview Questions Marine Engineering (124)
  • Power Plant Engineering Interview Questions Power Plant Engineering (172)
  • Textile Engineering Interview Questions Textile Engineering (575)
  • Production Engineering Interview Questions Production Engineering (25)
  • Satellite Systems Engineering Interview Questions Satellite Systems Engineering (106)
  • Engineering AllOther Interview Questions Engineering AllOther (1379)