WHAT IS THE USES OF PLC?
Answers were Sorted based on User's Feedback
Answer / amit singh
PLC is a microprocessor based device which is capable to stored instruction & implement control function such as sequencing,timing arithmetic & logical operation in in industry process
| Is This Answer Correct ? | 6 Yes | 0 No |
Answer / mohit mirani
PLC is a user friendly computer based an electronic device
which perfoms functions of complexity & tricky. also it
monitors crucial & complicated operstions.
also, plc have a advantages of pilot running, visual
observation, faster scan time, multiple verieties.
in short, plc is a replacement of an old relay logic control.
| Is This Answer Correct ? | 2 Yes | 1 No |
Answer / nirod kumar pradhan
PLC-PROGRAMMABLE LOGIC CONTROLLER.IT IS A ELECTRONICS
DEVICE. WHICH DEVICE PROVIDE OPEN & INTEGRATED CONTROL THAT
WILL HELP TO ENSURE MACHINE SAFETY AND PROTECT CURRENT
CONTROL INVESTMENT.
| Is This Answer Correct ? | 1 Yes | 2 No |
Answer / mahmooth
plc is controller...its advanced on microprocessor..its can de taken many no inputs & outputs..all industry can be used so resdused of cost, easily handle,wiring is easy
| Is This Answer Correct ? | 1 Yes | 2 No |
Answer / manuj sethi
PLC
STANDS FOR PROGRAMMABLE CONTROLLER DEVICE
A SOLID STATE/COMPUTERISED INDUSTRIAL COMPUTER THATS
PERMORMS A DESCRETE AND SEQUENTIAL OPERATION IN FACTORY
INVIROMENT
USES
1. DOCUMENTATION
2. TROUBBLE-SHOOTING
3. ABILITY TOCOMUNICATE WITH P.C
| Is This Answer Correct ? | 20 Yes | 30 No |
What is the advantage of on-off control?
what is RTDs in tranducers
what is the physical need to find 3bd frequencies?
the configure that is worst effected by ?
Define what are the charge carriers in p-type and n-type semiconductors?
ring counter's initial state is 01000. after how many clock cylces will it return to the initial state.
what is final value theorem ?
how to calculet the resolution of 4 to 20 mA current signal
What is voltage commutation?
temperature transmitter range o to 100c over range set value 21.6ma if you give source on the field transmitter showing iop out put also 21.6ma but dcs not showing iop samething if you simulat from hart 21.6ma in dcs showing iop how its possible?
What are the main components used for isolating the power circuits, power semiconductor from the low-power circuit?
....................... regulator operates the power transistors as high frequency on/off switch. A Series B Short C Switching D None of these
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)