how much wall area covered by 1 kg of lapi(putty)

Question Posted / lokesh

2 Answers
34251 Views
Jain Group, Ramky, I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

how much wall area covered by 1 kg of lapi(putty)..

Answer / sandy

Although, the coverage area would depend on the surface quality and the thickness applied the coverage area of putty on smooth surface with 1.5mm to 2mm thickness is 20-22 sq.ft./kg and ruff type surface with thickness more than 2mm to 3.5mm is 9-10 sq.ft./kg in ideal conditions.

Is This Answer Correct ?

45 Yes

7 No

how much wall area covered by 1 kg of lapi(putty)..

Answer / murali yadav

3 to 5 square ft is consumed 1 kg of putty

Is This Answer Correct ?

26 Yes

34 No

Post New Answer

More Civil Engineering Interview Questions

04. a. Slenderness ratio…………… 1 b. If the height of a stage is 15-0 & dia. of the prop is 5, the slenderness ratio is….… 1 c. If the height of a stage is 10-0 & dia of prop is 3, the number of bracing will be…… 1

0 Answers

Cut Linten (RCC-1:2:4)on 10" wall - what should be the width and hight of cut Linten? Secondly, 1 X 1.6 foot,4" thick window sun/rain shed (Chajja)should consume steel,Cement, sand and Stone chips?

0 Answers

5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)

0 Answers KIOCL,

HOW to calculate Rate analysis of M15 GRADE DESIGN MIX RATIO 1:2.5:5 WITH 40MM Size aggregates for 1 cumtr.

2 Answers Adani,

Advantage of Aluminum form work in terms of activities can be skip and cost too

0 Answers

at which depth the construction of tunnel is economical from cost and engineering aspect.

0 Answers

1)Why we can use half brick in 4inch wall and 2)why not in 9+inch brick wall

1 Answers TCS,

What is the ratio of materials used for M10, M15, M20 & M25 grades of concrete? Also specify the quantity of water used in each grade & how to calculate it?

4 Answers AVS,

what is shear force

2 Answers NLC Neyveli Lignite Corporation Limited,

What is the proportion of M 45 grade of concrete

2 Answers Payal Construction,

HOW TO CALCULATE LABOUR COST FOR CONCRETE WORK PER CUBIC METER.

8 Answers

how many type of pipe using in plumbing?

3 Answers Tulip,

For more Civil Engineering Interview Questions Click Here