How i can select current transformer and meters for the
upgrading the panal..for 200kw to 600kw....i need to select
monitoring and protection ct,s and apmpire meter ,kw meter too.
First find the Full load current of 600KW Load & select Incomer of about 20% higher than FLC,consider the CTs rating as per the incomer rating.
| Is This Answer Correct ? | 6 Yes | 0 No |
how mass curve differs from hydrograph.
what happens if we earth negative electrode of an rectifier transformer used in ESP. In which normaly positive is earthd from inside the xmer.
What is Tan Delta Test
What is the Load Capacity of Panther conductor (0.2) and dog conductor (0.1)
what is differential relay in power transformer??
why the earth terminal in three pin top is longer than rest of the two terminal and of bigger size?
Short circuit voltage of a transformer mainly depend on A ohmic resistance of primary B ohmic resistance of secondary C magnitude of leakage flux D cross sectional area of core
30 kVA and voltage 380/220VAC how to find out kA?
what is the effect come when i changed the alternator exciter field winding DC palority(+ve & -ve)which is coming from AVR.
How o select the electrical fuse?.What are its characteristics.How to select the material od fuse?
why inverter rating is in KVA
Difference between transmission line and cable?when ever a large water channel has to crossed it is easier to use cable then transmission line why?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)