How many types of traps are used?
Answer / thandi thevan
There Are four types of Traps Depending upon the "shapes"
1.P-Trap
2.Q-Trap
3.S-Trap
4.Floor Trap
And there are 4 more Traps available depending upon "use"
1.Gully Trap
2.Floor Trap
3.Interlocking Trap
4.Bottle Trap
| Is This Answer Correct ? | 7 Yes | 0 No |
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
what is a pitot tube
What the advantages and disadvantage of using 90mm and 100mm bricks for a wall of a house? Thanks for any input.
What is the difference between Design and nominal mix?
The minimum compressive strength of 1st and 2nd class bricks
difference between nominal mix and design mix difference between nominal size and actual size of brick,aggregate etc
for 100 sqm cement concret (1:2:4) 4cm thick floor,the quantity of cement required is
by which IS Code bend correction is two times of the dia meter of steel is taken
how to calculate for ramp slop?
How to compute minimum number of columns required for a site from area of site?
Which is default or standard size of tiles used in dado bathroom
Insted of water is there any liquid to mix in concrete / in mortar ?
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)