Answer / fazil

practically 8 bags of cement need for 1m3 concrete

i.e 8 X 50 = 400 kg

as per IS code W/C = 0.45

400 X 0.45 = 180 lts of water needed

but water cement ratio must be taken from slump test

Answer / rajeshkumarmaurya

its depends on Concrete Ratio.

For M5 - M20 = .4
M25 - M35 = .5

Answer / rajkumar

.45 TO 0.6 DEPEND UPON THE MIX DESIGN

Answer / rohit

Depend on tthe grade slump n cement per cum

Answer / abdullah

if structure is rcc then cement will be 380 kg . means no of
bag is 7.6.
for pcc then cement will be 360kg. means no. of bag is 7.1.
according to this u can find the quantity of water

Answer / samyak jain

The Water Cement ratio is
W/C=0.45 (IS 456-2000)

Now, Multiply the volume cement wth void ratio(30%).

W/Vc*1.3= 0.45

W= 0.585*Vc.
ANSWERE.

I dont know english very well to speak,in interview if they ask to introduce yourself means how to answer in english?

2 Answers   GMR,

In IS:456-2000 the workability of concrete is given in mm (slump)in cl.7.1. In IS:10262-1982, cl.3.3.4 & table-6 says +/- 3 percent adjustment is required in the quantity of water (calculated as per table-4 or 5), for each increase or decrease in the value of compacting factor (i.e. workability of concrete) by 0.1. How it is possible to calculate the exact quantity of water required for a particular grade of concrete? What is the relation between Slump & Compacting factor of concrete?

1 Answers   Unitech,

17. What is the thing that can disappoint you while working for a certain employer?

3 Answers   Cadila,

what is meaning of inverted beam.is it way to provide double mat in slab one at bottom and another at topif we go for provision of inverted beam. shall we construct structure with out plinth beam for us we have to construct small bus shelter

0 Answers   Anish Constructions, STUP Consultants Pvt Ltd,

How does a traffic light signal work ?

0 Answers   KCP,

8mm steel not available at site used bar 8mm and 150cc please tell me specing i used 10dia bar write formula please

4 Answers   Bestech,

What mean by Characteristic strength of concrete (fck)

1 Answers   IJMCPL,

What is the difference between undo & redo?

0 Answers  

pls tell me about method of cutting length of ties column

0 Answers  

What is the withdrawal force of steel nails?

0 Answers  

What is IS ?

4 Answers  

what is the difference between NP2 Class and NP3 Class RCC Hume pipes

8 Answers   GWRDC, IVRCL, IVRL,